Removing the SnapVault schedules for the old volume

Before you remove the schedules, make a note of the schedule configuration, including retention periods. Doing so enables you to set up the schedule in the same way on the new secondary volume.

Steps

1. View the existing schedules by entering the following command: snapvault snap sched sec_vol
2. Remove the schedules by entering the following command: snapvault snap unsched sec_vol
   Note: If transfers to the secondary volume are currently in process, the snapvault snap unsched command fails. Wait for the transfers to finish and then repeat the command.

3. Verify that the files in the volume are either in the idle or snapvaulted state.