List of Publications
Books
1. Uz, ME and Hadi, MNS (2017). Earthquake Resistant Design of Buildings. CRC Press. 290 Pages. ISBN 9780815391722.
2. Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2015). Nonlinear Analysis of Concrete-Filled Steel Tubular Columns. Scholars’ Press. ISBN 978-3-639-66536-9
Book Chapters
1. Sharafi, P, Hadi, MNS, Teh, LH (2013). Cost Optimization of Column Layout Design of Reinforced Concrete Buildings. In Gandomi AH, Yang XS, Talatahari S, Alavi AH. 2013. Metaheuristic Applications in Structures and Infrastructures. Elsevier, London. Elsevier, ISBN: 9780123983640, Chapter 6, pp. 129-146.
Journal Publications
1.
Ahmed,
M., Liang, Q. Q., Patel, V. I. and Hadi, M. N. S. (2018). Nonlinear analysis of
rectangular concrete-filled double steel tubular short columns incorporating
local buckling, Engineering Structures.
Vol. 175, pp. 13-26.
2.
Peng,
K, Yu, T, Hadi, MNS and Huang, Le. (2018). Compressive Behavior of Hybrid Double-Skin
Tubular Columns with a Rib-Stiffened Steel Inner Tube. Composite Structures. https://doi.org/10.1016/j.compstruct.2018.07.083.
Vol. 204, pp. 634-644.
3.
Alhussainy, F, Sheikh, MN and Hadi, MNS. (2018).
Axial Load-Axial
Deformation Behaviour of SCC Columns Reinforced with Steel Tubes. Structures. 15: 259-269.
4.
Feng,
H, Sheikh, MN, Hadi, MNS, Feng, L, Gao, D and Zhao, J. (2018). Interface bond
performance of steel fibre embedded in magnesium phosphate cementitious
composite. Construction and
Building Materials. 185: 648-660.
5. Goaiz, HA, Farhan, NA, Sheikh, MN, Yu, T and Hadi, MNS (xxxx). Experimental Evaluation of Tensile Strength Test Methods for Steel Fibre Reinforced Concrete. Magazine of Concrete Research. Letter 13 July 2018.
6.
Feng,
H, Sheikh, MN, Hadi, MNS, Gao, D and Zhao, J. (2018). Mechanical properties of
micro-steel fibre reinforced magnesium potassium phosphate cement composite. Construction and Building Materials. 185: 423-435.
7.
Farhan,
NA, Sheikh, MN and Hadi, MNS. (2018). Behaviour of Ambient Cured Steel Fibre
Reinforced Geopolymer Concrete Columns under Axial and Flexural Loads
Structures. Structures. 15: 184-195.
8.
Mai,
AD, Sheikh, MN and Hadi, MNS. (2018). Influence
of the Location of CFRP Strips on the Behaviour of Partially Wrapped Square
Reinforced Concrete Columns under Axial Compression. Structures. 15: 131-137.
9.
Wang, W, Martin, PR, Sheikh, MN, and Hadi, MNS. (xxxx).
Eccentrically Loaded FRP Confined Concrete with Different Wrapping Schemes. Journal of Composites for Construction ASCE. Letter 15 June 2018.
10.
Hasan, H, Sheikh, MN, and Hadi, MNS (2018).
Analytical Investigation on the Load-Moment Characteristics of GFRP Bar
Reinforced Circular NSC and HSC Columns. Construction and Building Materials. 183: 605-617.
11.
Hadi,
MNS, Sarhan, MM, and Teh, LH. (xxxx). Behavior of Concrete Beams Reinforced with
Steel Plates. ACI Structural Journal.
Letter 7 May 2018.
12.
Kamil,
G. M., Liang, Q. Q. and Hadi, M. N. S. (2018). Local buckling of steel plates
in concrete-filled steel tubular columns at elevated temperatures, Engineering Structures. 168, pp.
108-118. https://doi.org/10.1016/j.engstruct.2018.04.073
13.
Hadi, MNS, Goaiz, HA, and Yu, T (2018). Experimental Investigation of CFRP Confined Hollow Core Reactive
Powder Concrete Columns. Construction
and Building Materials. 174, pp. 343-355.
https://doi.org/10.1016/j.conbuildmat.2018.04.0870950-0618/
14.
Hadi, MNS, Al-Azzawi, M and Yu, T. (2018).
Effects of fly ash characteristics and alkaline activator components on
compressive strength of fly ash-based geopolymer mortar. Construction and Building Materials. 175, pp. 41-54. https://doi.org/10.1016/j.conbuildmat.2018.04.092 0950-0618/
15.
Ibrahim, A. A., Sheikh, M.
Neaz. And Hadi, M. N. S. (xxxx). Axial
Compressive Behavior of SEA Section Reinforced Square HSC Column. ACI Structural Engineering. Letter 6
April 2018.
16. Al-Tikrite, A and Hadi, MNS. (2018). Stress-strain relationship of unconfined RPC reinforced with Steel Fibers under Compression. Journal of Materials in Civil Engineering. 2018, 30(10): 04018234.
17.
Farhan,
NA, Sheikh, MN and Hadi, MNS. (2018). Experimental Investigation on the Effect
of Corrosion on the Bond between Reinforcing Steel Bars and Fibre Reinforced
Geopolymer Concrete. Structures. 14,
pp. 251-261.
18.
Hadi,
MNS, Algburi, AHA and Sheikh, MN. (2018). Axial and Flexural Behaviour of
Circular Reinforced Concrete Columns Strengthened with Reactive Powder Concrete
Jacket and Fibre Reinforced Polymer Wrapping. Construction and Building Materials. 172, pp. 717-727.
19.
Al-Azzawi,
M, Yu, T and Hadi, MNS. (2018). Factors affecting the bond strength between the
fly ash-based geopolymer concrete and steel reinforcement. Structures. 14, pp. 262-272.
20.
Feng,
H, Chen, G, Hadi, MNS, Sheikh, MN and Zhou, B. (2018). Mechanical behaviour of
micro-fine steel fibre reinforced sulphoaluminate cement composite. Construction and Building Materials. 170: 91-100.
21.
Al-Tikrite, A and Hadi,
MNS (2018). Influence of Steel Fibres on the
behaviour of RPC Circular Columns under Different Loading Conditions. Structures. 14, pp. 111-123.
22.
Mai,
AD, Sheikh, MN and Hadi, MNS. (2018). Investigation on the Behaviour of
Partial Wrapping in Comparison with Full Wrapping of Square RC Columns under
Different Loading. Construction and
Building Materials. 168, pp. 153-168.
23.
Farhan,
NA, Sheikh, MN and Hadi, MNS. (2018). Engineering Properties of Ambient Cured
Alkali-Activated Slag-Fly Ash Concrete Reinforced with Different Types of Steel
Fiber. ASCE Journal of Materials
in Civil Engineering. Vol. 30, no.7, 04018142, 12 pages. DOI:
10.1061/(ASCE)MT.1943-5533.0002333
24.
Hadi, MNS. Farhan, NA and Sheikh, MN (xxxx). Behavior of Ambient Cured
Geopolymer Concrete Columns under Different Loads. ACI Structural Journal. Letter 9 Jan 2018.
25.
Al-Hedad, ASA and Hadi,
MNS. (xxxx). Effect of Geogrid Reinforcement on the Flexural Behaviour of
Concrete Pavements. J. Road Materials and Pavement Design. DOI.
10.1080/14680629.2018.1428217.
Letter 5 Jan 2018.
26. Hadi, M. N. S., Ibrahim, A. A., and Sheikh, M. Neaz. (2018). Behavior of High-Strength Concrete Columns Reinforced with Galvanized Steel Equal-Angle Sections under Different Loading Conditions Journal of Structural Engineering. ASCE. 144(7): 04018070, 18 pages.
27. Goaiz , HA, Yu, T and Hadi, MNS (2018). Quality Evaluation Tests for Tensile Strength of Reactive Powder Concrete. Journal of Materials in Civil Engineering. ASCE. 2018, 30(5): 04018070. 9 pages.
28. Alhussainy, F, Sheikh, MN and Hadi, MNS. (2018). Behaviour of Self-Compacting Concrete-Filled Small Diameter Steel Tubes. Magazine of Concrete Research. 70(16): 811–821.
29. Khan, QS, Sheikh, MN, and Hadi, MNS (2018). Concrete Filled Carbon FRP Tube (CFRP-CFFT) Columns with and without CFRP Reinforcing bars: Axial-Flexural Interactions. Composites Part B. 133, pages 42-52.
30. Alhussainy, F, Hasan, HA, Sheikh, MN and Hadi, MNS. (xxxx). A New Method for Direct Tensile Testing of Concrete. Journal of Testing and Evaluation. Accepted 6 Sept 2017.
31. Hadi, MNS and Al-Tikrite, A (2017). Behaviour of Fibre-Reinforced RPC Columns under Different Loading Conditions. Construction and Building Materials. Vol. 156, Dec 2017, pp. 293-306.
32. Al-Tikrite, A and Hadi, MNS (2017). Mechanical properties of reactive powder concrete containing industrial and waste steel fibres at different ratios under compression. Construction and Building Materials. 154: 1024-1034.
33. Yuan, JS and Hadi, MNS (xxxx). Bond-slip Behaviour between GFRP I-section and Concrete. Composites Part B. Letter 29 July 2017.
34. Alhussainy, F, Sheikh, MN and Hadi, MNS. (2017). Behaviour of Small Diameter Steel Tubes under Axial Compression. Structures. Vol. 11, August, pp. 155-163.
35. Wang, W, Sheikh, MN, Hadi, MNS, Gao, D and Chen, G. (2017). Behaviour of concrete-encased concrete-filled FRP tube (CCFT) columns under axial compression. Engineering Structures. Vol. 147, pp. 256-268.
36. Goaiz , HA, Yu, T and Hadi, MNS (2018). Behaviour of CFRP-Confined Hollow Circular Concrete Columns with Inner PVC Tube. Advances in Structural Engineering. Vol. 21(8) 1120–1133, DOI: 10.1177/1369433217717110.
37. Al-Hedad, ASA, Bambridge, E and Hadi, MNS, (2017). Influence of Geogrid on the Draying Shrinkage Performance of Concrete Pavements. Construction and Building Materials Journal. 146: 165-174.
38. Hadi, MNS and Yuan, JS. (xxxx). Experimental investigation of composite beams reinforced with GFRP I-beam and steel bars. Construction and Building Materials Journal. Accepted 28 March 2017.
39. Jameel, M, Sheikh, MN. and Hadi, MNS, (2017). Behaviour of Circularized and FRP Wrapped Hollow Concrete Specimens under Axial Compressive Load. Composite Structures. Vol. 171, pp. 538-548.
40. Tran, TM. and Hadi, MNS (2017). Shear strength model of RC exterior joint under cyclic loading. Structures and Buildings. Vol. 170, Issue SB8, pp. 603-617.
41. Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2017). Nonlinear analysis of biaxially loaded rectangular concrete-filled stainless steel tubular slender beam columns. Engineering Structures. 9 March, 2017. 140: 120-133.
42. Hadi, MNS. Farhan, NA and Sheikh, MN (2017). Design of Geopolymer Concrete with GGBFS at Ambient Curing Condition Using Taguchi Method. Construction and Building Materials Journal. 1 June 2017, 140: 424-431.
43. Hadi, MNS. Balanji, EKZ, and Sheikh, MN and (xxxx). Behavior of Steel Fiber Reinforced HSC Columns under Different Loads. ACI Structural Journal. Accepted 7 Feb 2017.
44. Hadi, MNS, Jameel, M and Sheikh, MN. (2017). Behavior of Circularized Hollow RC Columns under Different Loading Conditions. Journal of Composites for Construction ASCE. 04017025-1. 21(5). 13 pages. Oct 2017.
45. Youssef, J and Hadi, MNS (2017). Axial Load-Bending Moment Diagrams of GFRP Reinforced Columns and GFRP Encased Square Columns. Construction and Building Materials Journal. 15 March 135: 550-564.
46. Hasan, H, Sheikh, MN, and Hadi, MNS (2017). Performance Evaluation of High Strength Concrete and Steel Fibre High Strength Concrete Columns Reinforced with GFRP Bars and Helices. Construction and Building Materials Journal. 1 March 134: 297-310.
47. Hadi, MNS., Alhussainy, F, and Sheikh, MN. (2017). Behavior of Self-Compacting Concrete Columns Reinforced Longitudinally with Steel Tubes. Journal of Structural Engineering, ASCE. 04017024-2. 143(6), 14 pages.
48. Karim, H., Sheikh, MN and Hadi, MNS. (2017). Longitudinal Reinforcement Limits for FRP Reinforced Concrete Members. ACI Structural Journal. Title No. 114-S55. V. 114, No. 3, May-June 2017. Pp. 687-696.
49. Hadi, MNS., Hasan, H, and Sheikh, MN. (2017). Experimental Investigation on Circular High Strength Concrete Columns Reinforced with Glass Fiber-Reinforced Polymer Bars and Helices under Different Loading Conditions. Journal of Composites for Construction ASCE. Vol. 24, No. 4, Aug 2017. 04017005-1 to 13.
50. Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2017). Nonlinear Analysis of Circular High Strength Concrete-Filled Stainless Steel Tubular Slender Beam-Columns. Engineering Structures. 130:1-13.
51. Khan, QS, Sheikh, MN, and Hadi, MNS (xxxx). Axial-Flexural Interactions of Concrete Filled Glass Fiber Reinforced Polymer Tube (GFRP-CFFT) Columns with and without reinforcing GFRP bars. Journal of Composites for Construction ASCE. Accepted 13 Sept 2016.
52. Pham, T.M,, Youssef, J., Hadi, M.N.S. (2017). Effects of Fabrication Technique on Tensile Properties of Fiber Reinforced Polymer. Journal of Testing and Evaluation. doi:10.1520/JTE20150525. Vol 45, No 5, Sept, pp. 1524-1534.
53. Khan, QS, Sheikh, MN, and Hadi, MNS (2016). Axial Compressive Behaviour of Circular CFFT: Experimental Database and Design-oriented Model. Steel and Composite Structures, An International Journal. 21(4): 921-947.
54. Yu, T, Teh, LH and Hadi, MNS (xxxx). High Strength Steel Plates in Hybrid FRP-Concrete-Steel Columns: Concept and Behaviour. Advances in Structural Engineering. Accepted 12 June 2016.
55. Hadi, MNS, Khan, QS, and Sheikh, MN (2016). Axial and Flexural Behavior of Unreinforced and FRP Bar Reinforced Circular Concrete Filled FRP Tube Columns. Construction and Building Materials Journal. Vol. 122, pp. 43-53.
56. Karim, H., Sheikh, MN and Hadi, MNS. (xxxx). Load and Moment Interaction Diagram for Circular Concrete Columns Reinforced with GFRP Bars and GFRP Helices. Journal of Composites for Construction ASCE. Accepted 3 Jun 2016.
57. Karim, H., Sheikh, MN and Hadi, MNS. (2016). Axial Load-Axial Deformation Behaviour of Circular Concrete Columns Reinforced with GFRP Bars and Helices. Construction and Building Materials Journal. Vol. 112, pp. 1147-1157.
58. Alhussainy, F, Hasan, H, Rogic, S, Sheikh, MN, and Hadi, MNS. (2016). Direct Tensile Testing of Self-Compacting Concrete. Construction and Building Materials Journal. Vol. 112, pp. 903-906.
59. Wang, W, Sheikh, MN. And Hadi, MNS, (2016). Experimental Study on FRP Tube Reinforced Concrete (FTRC) Columns under Different Loading Conditions. Journal of Composites for Construction ASCE. 20(5). 04016034. 11 Pages.
60. Hadi, MNS and Youssef, J. (2016). Experimental Investigation of GFRP Reinforced and GFRP Encased Square Concrete Specimens under Axial and Eccentric Load, and Four-Point Bending Test. Journal of Composites for Construction ASCE. 20(5). 04016020. 16 pages
61. Wang, W, Sheikh, MN. And Hadi, MNS, (2016). Axial compressive behaviour of concrete confined with polymer grid. Materials and Structures. Vol. 49, no. 9, pp. 3893-3908.
62. Hadi, M. N. S., Karim, H and Sheikh, M. N. (2016). Experimental Investigations on Circular Concrete Columns Reinforced with GFRP Bars and Helices under Different Loading Conditions. Journal of Composites for Construction ASCE. 20(4): 04016009.
63. Wang, W, Sheikh, MN. And Hadi, MNS, (xxx). Behaviour of perforated GFRP tubes under axial compression. Thin-Walled Structures. Accepted 25 June 2015.
64. Pham, T.M, Hadi, MNS and Tran, TM. (2015). Maximum Usable Strain of FRP-Confined Concrete. Construction and Building Materials Journal. Vol. 83, pp. 119-127, 15 May 2015.
65. Hadi, MNS, Wang, W and Sheikh, MN. (2015). Axial compressive behaviour of GFRP tube reinforced concrete columns Construction and Building Materials Journal. Vol. 81, p. 198-207.
66. Pham, T.M, Hadi, M. N. S. and Youssef, J. (xxxx). Optimized FRP Wrapping Schemes for Circular Concrete Column. Journal of Composites for Construction ASCE. Accepted 18 Feb 2015.
67. Chen, Gang, Hadi, M.N.S., Gao, Danying, and Zhao, Liangping. (2015). Experimental study on the properties of corroded steel fibres. Construction and Building Materials Journal. 79: 165-172.
68. Hadi, MNS and Tran, TM. (2015). Seismic Rehabilitation of Reinforced Concrete Beam-Column Joints by Bonding with Concrete Covers and Wrapping with FRP Composites. Materials and Structures. Accepted 19/12/2014. DOI 10.1617/s11527-014-0511-4. Published on line 6 Jan 2015.
69. Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2015). “Biaxially loaded high-strength concrete-filled steel tubular slender beam-columns, Part II: Parametric study”, Journal of Constructional Steel Research. ERA Journal Rank = A*. 100: 200-207.
70. Sharafi, P, Teh, LH and Hadi, MNS. (2014). Conceptual Design Optimisation of Rectilinear Building Frames - A Knapsack Problem Approach. Engineering Optimization. 47 (10), pp. 1303-1323.
71. Pham, T.M and Hadi, M. N. S. (2014). Confinement Model for FRP Confined Normal- and High-Strength Concrete Circular Column. Construction and Building Materials Journal. Vol. 69, pp. 83-90.
72. Sharafi, P, Teh, LH and Hadi, MNS. (2014). Shape Optimisation of Thin-Walled Steel Sections using Graph Theory and ACO Algorithm. Journal of Constructional Steel Research. Vol. 101, Oct. pp. 331-341.
73. Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2014). “Nonlinear analysis of axially loaded circular concrete-filled stainless steel tubular short columns”, Journal of Constructional Steel Research. ERA Journal Rank = A*. Vol. 101, pp. 9-18.
74. Hadi, MNS and Tran, TM. (2014). Retrofitting Nonseismically Detailed Exterior Beam-Column Joints Using Concrete Covers Together with CFRP Jacket. Construction and Building Materials Journal. Vol. 63, pp. 161-173.
75. Uz, M.E. and Hadi, M.N.S. (2014). Optimal Design of Semi Active Control for Adjacent Buildings Connected by MR Damper Based on Integrated Fuzzy Logic and Multi-Objective Genetic Algorithm Engineering Structures. Engineering Structures. Vol. 69, 15 June pp. 135-148.
76. Patel, V. I., Liang, Q. Q. and Hadi, M. N. S., “Behavior of biaxially-loaded rectangular concrete-filled steel tubular slender beam-columns with preload effects”, Thin-Walled Structures, 2014. ERA Journal Rank: A. Impact Factor = 1.231. Vol. 79, pp. 166-177.
77. Pham, T.M and Hadi, M. N. S. (2014). Predicting Stress and Strain of FRP Confined Square/Rectangular Columns Using Artificial Neural Networks. Journal of Composites for Construction ASCE. Vol. 18, No. 16, pp. 04014019(1-8).
78. Tran, TM, Hadi, MNS and Pham, TM (2014). A new empirical model for shear strength of reinforced concrete beam-column connections. Magazine of Concrete Research, Vol. 66, No. 10, 2014, pp. 514-530. DOI: 10.1680/macr.13.00310.
79. Hadi, MNS and Uz, ME (2015). Investigating the Optimal Passive and Active Vibration Controls of Adjacent Buildings Based on Performance Indices using Genetic Algorithms. Engineering Optimization. 47 (2), pp. 265-286.
80. Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2014), "Numerical analysis of high-strength concrete-filled steel tubular slender beam-columns under cyclic loading", Journal of Constructional Steel Research. ERA Journal Rank: A*. Vol. 92, pages 183-194.
81. Hadi, MNS and Le, TD. (2014). Behaviour of Hollow Core Square Reinforced Concrete Columns Wrapped with CFRP with Different Fibre Orientations. Construction and Building Materials Journal. Volume 50, Jan, pp. 62-73.
82. Pham, TM, Doan, LV and Hadi, M. N. S. (2013). Strengthening Square Reinforced Concrete Columns by Circularization and FRP Confinement. Construction and Building Materials Journal. Volume 49, Dec, pp. 490-499.
83. Pham, T.M and Hadi, M. N. S. (2014). Stress Prediction Model for FRP Confined Rectangular Concrete Columns with Rounded Corners. Journal of Composites for Construction ASCE. Vol. 18, No. 1, 04013019, 10 pages.
84. Pham, T.M and Hadi, M. N. S. (2013). Strain Estimation of CFRP Confined Concrete Columns Using Energy Approach. Journal of Composites for Construction ASCE. Vol. 17, No. 6, pp. 1-11.
85. Sharafi, P, Hadi, MNS, Teh, LH (2014). Geometric design optimization for dynamic response problems of continuous reinforced concrete beams. Journal of Computing in Civil Engineering, Vol. 28, No. 2, pp. 202-209. DOI: 10.1061/(ASCE)CP.1943-5487
86. Patel, V. I., Liang, Q. Q. and Hadi, M. N. S., (2013). “Numerical analysis of circular concrete-filled steel tubular slender beam-columns with preload effects”, International Journal of Structural Stability and Dynamics, 2013, 13(3), 1250065 (23 pages). ERA Journal Rank: B. Impact Factor = 0.455.
87. Hadi, M. N. S., Pham, T. Minh, Lei, X. (2013). New Method of Strengthening Reinforced Concrete Square Columns by Circularizing and Wrapping with FRP or Steel Straps. Journal of Composites for Construction ASCE. Vol. 17, No. 2, April 1, 2013, pp. 229-238.
88. Hadi, MNS and Widiarsa, BR (2012). Axial and Flexural Performance of Square RC Columns Wrapped with CFRP under Eccentric Loading. J Composites for Construction, ASCE. Vol. 16, No. 6, pp. 640-649.
89. Patel, V. I., Liang, Q. Q. and Hadi, M. N. S. (2012). Inelastic stability analysis of high strength rectangular concrete-filled steel tubular slender beam-columns, Interaction and Multiscale Mechanics, An International Journal, Vol. 5, No. 2 pp. (2012) 91-104.
90. Liang, Q. Q., Patel, V. I. and Hadi, M. N. S. (2012). Biaxially loaded high-strength concrete-filled steel tubular slender beam-columns, Part I: Multiscale simulation, Journal of Constructional Steel Research. Vol. 75, pp. 64-71.
91. Hadi, MNS and Saeed Alrudaini, TM (2012). New Building Scheme to Resist Progressive Collapse. J Architectural Eng, ASCE. Vol. 18, No. 4, pp. 324-331.
92. Yazici, V and Hadi, MNS. (2012). Normalized Confinement Stiffness Approach for Modeling FRP Confined Concrete. J Composites for Construction, ASCE. Vol. 16, No. 5, pp. 520-528. [ERA-A]
93. Sharafi, P, Hadi, MNS, Teh, LH (2012). Heuristic Approach for Optimum Cost and Layout Design of 3D Reinforced Concrete Frames. J Structural Eng, ASCE, Vol. 138, No. 7, July 1, 2012. Pp. 853-863. [ERA-A*]
94. Patel, VI, Liang, QQ and Hadi, MNS (2012). High strength thin-walled rectangular concrete-filled steel tubular slender beam-columns, Part I: Modeling. Journal of Constructional Steel Research 70 (2012) 377–384. [ERA-A]
95. Patel, VI, Liang, QQ and Hadi, MNS (2012). High strength thin-walled rectangular concrete-filled steel tubular slender beam-columns, Part II: Behavior. Journal of Constructional Steel Research 70 (2012) 368-376. [ERA-A]
96. Hadi, M. N. & Arfiadi, Y. (2011). Moment coefficients for statically indeterminate prestressed concrete structures. Asian Journal of Civil Engineering, 12 (1), 39-59. (Publication ID=34823)
97. Hadi, MNS and Zhao, H. (2011). Experimental Study of HSC Columns Confined with Different Types of Mesh under Eccentric and Concentric Loads. Journal of Materials in Civil Engineering, ASCE. Vol. 23, No. 6, June 1, 2011, pp. 823-832. [ERA-A]
98. Hadi, MNS (2011). Rehabilitating Destructed Reinforced Concrete T Connections by Steel Straps. Construction and Building Materials Journal. Volume 25, Issue 2, Feb, pp. 851-858. [ERA-A]
99. Kusumawardaningsih, Y and Hadi, MNS (2010). Comparative Behaviour of Hollow Columns Confined with FRP Composites. Journal of Composite Structures. Volume 93, Issue 1, Dec, pp. 198-205. [ERA-A]
100.
Hadi, MNS (2010). Behaviour
of reinforced concrete columns wrapped with fibre reinforced polymer under
eccentric loads. Australian Journal
of Structural Engineering, Institution of Engineers
101. Yazici, V and Hadi, MNS. (2009). Axial Load-Bending Moment Diagrams of Carbon-FRP Wrapped Hollow Core Reinforced Concrete Columns. Journal of Composites for Construction, Vol. 13, No. 4, pp. 262-268. No. Cited = 1 [ERA-A]
103. Hadi, MNS (2009). Behaviour of Eccentric Loading of FRP Confined Fibre Steel Reinforced Concrete Columns. Construction and Building Materials Journal. Volume 23, Issue 2, February, pp. 1102-1108. No. Cited = 5 [ERA-A]
104. Hadi, MNS (2008). Bond of High Strength Concrete with High Strength Reinforcing Steel. The Open Civil Engineering Journal. Volume 2, pp. 143-147.
105.
Hadi, MNS and
106.
Hadi, MNS and
107. Hadi, MNS (2007). The Behaviour of FRP Wrapped HSC Columns under Different Eccentric Loads. Journal of Composite Structures. Volume 78, Issue 4, June 2007, Pages 560-566. No. Cited = 6 [ERA-A]
108.
Hadi, MNS. (2007).
Behaviour of FRP Strengthened Concrete Columns under Eccentric
Compression Loading. Journal of Composite Structures. Volume
77, Issue 1, January, pp. 92-96. No.
Cited = 13 [ERA-A]
109. Hadi, MNS and Elbasha, NM. (2007). Effects of Tensile Reinforcement Ratio and Compressive Strength on the Behaviour of Over Reinforced Helically Confined HSC Beams. Construction and Building Materials Journal. Volume 21, Issue 2, February 2007, Pages 269-276. No. Cited = 3 [ERA-A]
110. Hadi, MNS. (2007). Using Fibres to Enhance the Properties of Concrete Columns. Construction and Building Materials Journal. Volume 21, pp. 118-125. No. Cited = 2 [ERA-A]
111. Jalalifar, H, Aziz, NI and Hadi, MNS. (2006). The effect of surface profile, rock strength and pretension load on bending behaviour of fully grouted bolts. Geotechnical and Geological Engineering 24:1203–1227. No. Cited = 3
112. Arfiadi, Y. and Hadi, MNS. (2006). Continuous Bounded Controllers for Active Control Structures. The International Journal of Computers and Structures. Volume 84, Issue 12, May, pp. 798–807. No. Cited = 4 [ERA-A*]
113. Hadi, MNS. (2006). Comparative Study of Eccentrically Loaded FRP Wrapped Columns. Journal of Composite Structures. Volume 74, Issue 2, pp. 127–135. No. Cited = 10 [ERA-A]
114.
Hadi, MNS. (2006). Behaviour of FRP Wrapped
115. Elbasha, NM and Hadi, MNS. (2005). Experimental testing of helically confined HSC beams. Structural Concrete. Thomas Telford and fib. Vol. 6, no. 2, pp. 43-48. No. Cited = 2
116. Hadi, MNS. (2005). Helically Reinforced HSC Beams Reinforced with High Strength Steel. International Journal of Materials and Product Technology (IJMPT). Vol. 23, Nos. 1/2, pp.138-148. No. Cited = 1
117. Hadi, MNS. (2005). Behaviour of High Strength Concrete Columns Confined with Helices. Construction and Building Materials Journal. Vol. 19, Number 2, pp. 135-140. No. Cited = 1 [ERA-A]
118. Bodhinayake, B.C. and Hadi, MNS (2004). Design of Flexible Pavements Based on Finite Element Analysis. The International Journal of Pavement Engineering & Asphalt Technology. Vol. 5, issue 2, Dec. pp. 55-68.
119. Jalalifar, H, Aziz, N, and Hadi, M. N. S. (2004). Non-linear Analysis of Bolt-Grout-Concrete Interaction in Reinforced Shear Joint. Journal of Mines, Metals, and Fuels. Vol 52, Nos 9 and 10, September –October, pp 208-216. No. Cited = 1
120.
Hoban, G., Lefoe, G., James, B., Curtis, S., Kaidonis,
M., Hadi, MNS, Lipu, S., McHarg, C., Collins, R. (2004). A Web Environment
Linking University Teaching Strategies with Graduate Attributes. Journal
of University Teaching and Learning Practice.
122. Hadi, MNS. (2003). Behaviour of Wrapped HSC Columns Under Eccentric Loads. Asian Journal of Civil Engineering (Building and Housing). Vol. 4, Nos 2&3, pp. 91-100. No. Cited = 2
123. Hadi, MNS (2003). High Strength Columns Reinforced with High Strength Steel. Journal of the International Association of Concrete Technology. Vol. 1, Number 2, pp. 161-170.
124.
Hadi, MNS and
Symons, MG. (2003). Using Drucker-Prager Model for the Analysis of Recycled
125.
Hadi, MNS and
126. Hadi, MNS. (2003). Neural Networks Applications in Concrete Structures. The International Journal of Computers and Structures. Vol 81, No. 6 pp 373 – 381. No. Cited = 38 [ERA-A*]
127. Hadi M.N.S. and Schmidt L.C. (2003) Use of helices for enhancing the properties of reinforced concrete beams. Int. J. Mat. And Prod. Tech., Vol. 19, Nos 3/4, pp. 247–258. . No. Cited = 2
128. Hadi, MNS. (2003). Retrofitting of Shear Failed Reinforced Concrete Beams. Journal of Composite Structures. Volume 62, Issue 1, October 2003, Pages 1-6. No. Cited = 7 [ERA-A]
129. Li, J. and Hadi, MNS. (2003). Behaviour of Externally Confined High Strength Concrete Columns under Eccentric Loading. Journal of Composite Structures. Volume 62, Issue 2, November 2003, Pages 145-153. No. Cited = 30 [ERA-A]
130. Hadi, MNS and Schmidt, LC. (2002). Use of Helices in Reinforced Concrete Beams. ACI Structural Journal. Vol. 99, No. 2, pp. 191-198. No. Cited = 10 [ERA-A]
131. Hadi, MNS (2001). Life Cycle Cost Analysis of Pavements. The International Journal of Pavement Engineering & Asphalt Technology. Eds. H Al Nageim, AR Woodside, R Hunter and G. Row. ISSN 1464-8164. Vol. 2, Issue 1, May. pp.61-74.
132. Arfiadi, Y. and Hadi, MNS (2001). Optimal Direct (Static) Output Feedback Controller Using Real Coded Genetic Algorithms. Int. J. of Computers and Structures. ISSN 0045-7949, Vol. 79, Issue 17, July, pp. 1625-1634. No. Cited = 16 [ERA-A*]
133. Hadi, MNS and Arfiadi, Y. (2001). Optimum Rigid Pavement Design by Genetic Algorithms. Int. J. of Computers and Structures. ISSN 0045-7949, Vol. 79, Issue 17, July, pp. 1617-1624. No. Cited = 6 [ERA-A*]
134. Hadi, MNS (2001). Developing Specifications for Unsealed Road Pavements. The International Journal of Pavement Engineering & Asphalt Technology. Eds. H Al Nageim, G. Row and D.J. Pearson. ISSN 1464-8164. Vol. 2, Issue 2, pp. 36-58.
135. Arfiadi, Y. and Hadi, MNS (2000). Passive and Active Control of Three-Dimensional Buildings. Earthquake Engineering & Structural Dynamics, An International Journal. John Wiley & Sons, Vol. 29, pp. 377-396. No. Cited = 17 [ERA-A]
136. Hadi, MNS (2000). Optimum Design of Rigid Road Pavements Using AUSTROADS. The International Journal of Pavement Engineering & Asphalt Technology. Eds. H Al Nageim, AR Woodside and R Hunter. ISSN 1464-8164. Vol. 1, Issue 1, pp. 13-26.
137.
Hadi,
MNS and Malik, AA (2000). Flexipave:
a Finite Element Program for the Analysis of Flexible Pavements. The
International Journal of Construction Information Technology. Eds. Alshawi
and Skitmore, Vol. 8, No. 1, pp. 29-52.
139.
Hadi,
MNS and Das, S (1999). A Solution
Approach for Non-Linear Analysis of Concrete Members. Dirasat. ISSN 1560-4551, Vol.
26, No. 2, pp. 300-308.
140. Hadi, MNS and Arfiadi, Y (1998). Optimum Design of Absorber for MDOF Structures. ASCE, Journal of Structural Engineering, 124(11), 1272-1280. No. Cited = 29 [ERA-A*]
141. Hadi, MNS (1998). “COLD-STEEL” A Computer Program for the Design of Cold Formed Steel Structures. The International Journal of Construction Information Technology. Editors: Mustafa Alshawi and Martin Skitmore, ISSN 0968-0365, Vol. 6, No.2, pp. 39-65.
142. Hadi, MNS (1996). Utilising the Capabilities of Spreadsheets for Designing Structures. The International Journal of Construction Information Technology. Eds. Alshawi and Skitmore, Vol. 4, No.2, pp. 15-28.
143.
Hadi, MNS and
144. Hadi, MNS and Symons, MG (1996). Computing Stresses in Road Pavements Using CIRCLY, NASTRAN, and STRAND6. Australian Civil/Structural Engineering Transactions, IEAust. Vol. CE38, No. 2, 3, and 4, pp. 89-93. No. Cited = 1
145.
Hadi, MNS and
1.
Hadi, MNS,
Schmidt, LC and Basu, A. (2001). Proceedings
of the Second International Conference on Mechanics of Structures, Materials
and Systems, MSMS 2001. ISBN 0
86418 656 8,
2.
Hadi,
MNS and Schmidt, LC. (1999). Proceedings
of the International Conference on Mechanics of Structures, Materials and
Systems. ISBN 0 86418 588 X,
Conference Papers
1. Farhan, NS, Sheikh, MN and Hadi, MNS. (2018). Design of Geopolymer Concrete with Fly Ash Using the Taguchi Method. ACMSM. Dec 2018.
2. Al-Hedad, ASA and Hadi, MNS. (2018). Initiation of Critical Cracks of Concrete Pavements Reinforced with Geogrid. ACMSM. Dec 2018.
3. Al-Hedad, ASA and Hadi, MNS. (2018). High Strength Concrete Reinforced with Geogrid under High Temperature. ACMSM. Dec 2018.
4. Almalome, M.H.A., Yu, T and Hadi, MNS. (2018). Trial Mixes of Perlite Concrete and Vermiuclite Concrete. ACMSM. Dec 2018.
5. Almalome, M.H.A., Yu, T and Hadi, MNS. (2018). A New Anchor for Direct Tensile Test of Moulded and Pultruded Glass-Fibre Reinforced Polymer (GFRP) Grating Mesh. ACMSM. Dec 2018
6. Alhussainy, F, Sheikh, MN and Hadi, MNS. (2018). Flexural Behaviour of Self-Compacting Concrete Columns Reinforced with Steel Tubes. ACMSM. Dec 2018
7.
Alhussainy, F, Sheikh, MN and Hadi, MNS. (2018).
Bond Behaviour of Steel Tubes in Self-Compacting Concrete. ACMSM. Dec 2018
8. Ibrahim, A. A., Sheikh, M. Neaz. & Hadi, M. N. S. (2017). Performance Evaluation of Square High Strength Concrete (HSC) Columns Reinforced with Steel Equal Angle (SEA) Sections Under Axial Compression. In Z. Tao, F. R. Mashiri & M. Hassan (Eds.), Proceedings of the 1st International Conference on Structural Engineering Research (iCSER2017) (pp. 37-42). Sydney, Australia: Science, Technology and Management Crest Australia. RIS 117482
9.
Jameel, M. T.,
Sheikh, M. Neaz. & Hadi, M. N. S. (2017). Influence of Longitudinal FRP
Straps on the Behaviour of Circularised and FRP Wrapped Square Hollow RC
Concrete Specimens. In Z. Tao, F. R. Mashiri & M. Hassan (Eds.), Proceedings
of the 1st International Conference on Structural Engineering Research
(iCSER2017) (pp. 8-16). Sydney, Australia: Science, Technology and Management
Crest Australia. RIS117485
10.
Ibrahim, A., Sheikh, M.
Neaz. & Hadi, M. N. S. (2017). Axial Load and Bending Moment Behaviour of
Square High Strength Concrete (HSC) Columns Reinforced with Steel Equal Angle
(SEA) Sections. In Z. Tao, F. R. Mashiri & M. Hassan (Eds.), Proceedings
of the 1st International Conference on Structural Engineering Research
(iCSER2017) (pp. 43-48). Sydney, Australia: Science, Technology and Management
Crest Australia. RIS 117488
11.
Alhussainy, F.,
Sheikh, M. Neaz. & Hadi, M. N. S. (2017). Ultimate Capacity Estimate of
Self-Compacting Concrete-Filled Small Diameter Steel Tubes under Axial Load. In
Z. Tao, F. R. Mashiri & M. Hassan (Eds.), Proceedings of the 1st
International Conference on Structural Engineering Research (iCSER2017) (pp.
155-160). Sydney, Australia: Science, Technology and Management Crest
Australia. RIS 117490
12.
Sarhan, M.M., Hadi, M. N. S. & Teh, L. H.
(2017). Strength and Ductility Behaviour of Steel Plate Reinforced Concrete
Beams under Flexural Loading. In Z. Tao, F. R. Mashiri & M. Hassan (Eds.), Proceedings
of the 1st International Conference on Structural Engineering Research (iCSER2017)
(pp. 161-166). Sydney, Australia: Science, Technology and Management Crest
Australia. RIS 117493
13.
Al-Tikrite,
A and Hadi, MNS. (2017). Influence of the Waste Steel Fibre Inclusion on the
Mechanical Properties of Reactive Powder Concrete. 28th Biennial National Conference of the Concrete Institute
of Australia and the 3rd International Congress on Durability of Concrete
(ICDC) MONDAY 23 October 2017 - WEDNESDAY 25 October 2017Adelaide Convention
Centre. Paper 11. 9 pages.
14.
Ibrahim,
AA, Sheikh, MN and Hadi, MNS. (2017). Evaluation of Concrete Strength Reduction
Due to Over Compaction. 28th
Biennial National Conference of the Concrete Institute of Australia and the 3rd
International Congress on Durability of Concrete (ICDC) MONDAY 23 October 2017
- WEDNESDAY 25 October 2017Adelaide Convention Centre. Paper 94. 6 pages.
15.
Goaiz,
HA, Yu, T and Hadi, MNS. (2017). Axial load-deformation Behaviour of CFRP
Confined Hollow Concrete Columns with Inner PVC Tube. 28th Biennial National Conference of the Concrete Institute
of Australia and the 3rd International Congress on Durability of Concrete
(ICDC) MONDAY 23 October 2017 - WEDNESDAY 25 October 2017Adelaide Convention
Centre. Paper 36. 9 pages.
16.
Goaiz,
HA, Yu, T and Hadi, MNS (2017). Tensile Strength of Reactive Powder Concrete 28th Biennial National Conference
of the Concrete Institute of Australia and the 3rd International Congress on
Durability of Concrete (ICDC) MONDAY 23 October 2017 - WEDNESDAY 25 October
2017Adelaide Convention Centre. Paper 37, 8 pages.
17.
Howes,
R, Hadi, MNS and South W (2017). Evaluation of Concrete Strength Reduction Due
to Over Compaction. 28th
Biennial National Conference of the Concrete Institute of Australia and the 3rd
International Congress on Durability of Concrete (ICDC) MONDAY 23 October 2017
- WEDNESDAY 25 October 2017Adelaide Convention Centre. Paper, 169. 10
pages.
18.
Peng,
K, Yu, Y and Hadi, MNS (2017). Compression Tests on Square Hybird FRP-Concrete-Steel
Tubular Columns with A Rib-Stiffened Steel Inner Tube. APFIS2017 - 6th
Asia-Pacific Conference on FRP in Structures. Singapore, 19-21st July 2017.
Paper 168. 5 pages. International Institute for
FRP in Construction
19.
Jameel,
M. T., Sheikh, M. Neaz. & Hadi, M. N. S. (2017). Theoretical axial
stress-axial strain behaviour of FRP confined square and circularized hollow
concrete specimens under axial compression. Proceedings of the 6th Asia-Pacific
Conference on FRP in Structures (APFIS 2017) (pp. 173-1-173-5). International
Institute for FRP in Construction.
20.
Wang,
W., Martin, P. R., Anh-Duc, M., Sheikh, M. Neaz. & Hadi, M. N. S. (2017).
Eccentric axial load capacity of FRP confined concrete with different wrapping
configurations. Proceedings of the 6th Asia-Pacific Conference on FRP in
Structures (APFIS 2017) (pp. 172-1-172-5). International Institute for FRP in
Construction.
21.
Yuan,
JS and Hadi, MNS (2017). Flexural Behavior of Composite Beam Reinforced with GFRP I-Beam. APFIS2017 - 6th
Asia-Pacific Conference on FRP in Structures. Singapore, 19-21st July 2017.
Paper 65. 7 pages. International
Institute for FRP in Construction
22.
Youssef, J. and Hadi, MNS (2016). Experimental
Investigation of GFRP Reinforced Square Concrete Columns Under Axial and
Eccentric Loading. The 8th International Conference on Fiber Reinforced Polymer
(FRP) Composites in Civil Engineering (CICE2016), 14-16 December 2016, Hong
Kong, China.
23.
Yuan, J.S. and Hadi, MNS (2016). Experimental
study on bond behavior between concrete and GFRP pultruded I-section using
push-out test. The 8th International Conference on Fiber Reinforced Polymer
(FRP) Composites in Civil Engineering (CICE2016), 14-16 December 2016, Hong Kong,
China.
24.
Al-Hedad,
A.S. and Hadi, MNS. (2016). Flexural Behaviour of Concrete Pavements Reinforced
with Geogrid Materials. The 24th Australasian Conference on the Mechanics of
Structures and Materials (ACMSM24), Perth, Australia, 6-9 December 2016.
25.
Algburi,
A.H.M., Sheikh, MN and Hadi, MNS (2016). Influence of steel, glass and hybrid
fibres on the behaviour of reactive powder concrete. The 24th Australasian
Conference on the Mechanics of Structures and Materials (ACMSM24), Perth,
Australia, 6-9 December 2016.
26.
Hasan, H, Alhussainy, F, Sheikh, MN, and Hadi,
MNS. (2016). Direct tensile test of high strength concrete with and without
steel fibres. The
24th Australasian Conference on the Mechanics of Structures and Materials
(ACMSM24), Perth, Australia, 6-9 December 2016.
27.
Farhan,
NA, Sheikh, MN and Hadi, MNS (2016). Design of Alkali Activated Concrete Using
the Taguchi Method. The 24th Australasian Conference on the Mechanics of
Structures and Materials (ACMSM24), Perth, Australia, 6-9 December 2016.
28.
Balanji,
EKZ, Sheikh, MN and Hadi, MNS (2016). Behaviour of High Strength Concrete
Columns Reinforced with Steel Fibres under Different Eccentric Loads. The
Australasian Structural Engineering Conference 2016, Brisbane, Queensland 23 -
25 November 2016.
29.
Balanji,
EKZ, Sheikh, MN and Hadi, MNS (2016). Behaviour of High Strength Concrete
Reinforced with Different Types of Steel Fibres. The Australasian Structural
Engineering Conference 2016, Brisbane, Queensland 23 - 25 November 2016.
30.
Balanji,
EKZ, Sheikh, MN and Hadi, MNS (2016). Behavior of Hybrid Steel Fiber Reinforced
High Strength Concrete. The First
European-Mediterranean Conference in Structural Engineering and Construction
(EURO-MED-SEC-1), Yildiz Technical University, Istanbul. ISBN:
978-0-9960437-2-4. doi: 10.14455/ISEC.res.2016.56. 6 pages. 24-29 May 2016.
31.
Balanji,
EKZ, Sheikh, MN and Hadi, MNS (2016). Performance of High Strength Concrete
Columns Reinforced with Hybrid Steel Under Different Loading under Conditions.
The First European-Mediterranean Conference in Structural Engineering and
Construction (EURO-MED-SEC-1), Yildiz Technical University, Istanbul. ISBN:
978-0-9960437-2-4. doi: 10.14455/ISEC.res.2016.83. 6 pages. 24-29 May 2016.
32.
Pham,
TM, Youssef, J, Hadi, MNS and Tran, TM. Effect of Different FRP Wrapping
Arrangements on the Confinement Mechanism. 1st Int Conf on Sustainable
Development of Civil, Urban and Transportation Eng, CUTE-2016. Ho Chi Minh
City, Viet Nam, 11-14 April 2016.
33.
Khan,
QS, Sheikh, MN and Hadi, MNS (2015). TENSION AND COMPRESSION TESTING OF FIBRE
REINFORCED POLYMER (FRP) BARS. The 12th International Symposium on Fiber
Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & The
5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures
(APFIS-2015) Joint Conference, 14-16 December 2015, Nanjing, China. Paper 014.
6 pages.
34.
Wang,
W., Sheikh, MN and Hadi, MNS (2015). CONFINING CONCRETE COVER OF GFRP TUBE
REINFORCED CONCRETE COLUMNS WITH POLYMER GRIDS. The 12th International
Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures
(FRPRCS-12) & The 5th Asia-Pacific Conference on Fiber Reinforced Polymers
in Structures (APFIS-2015) Joint Conference, 14-16 December 2015, Nanjing,
China. Paper 033. 6 pages.
35.
Khan,
QS, Sheikh, MN and Hadi, MNS (2015). AXIAL COMPRESSIVE BEHAVIOUR OF CIRCULAR
CONCRETE FILLED FIBRE REINFORCED POLYMER TUBE (CFFT) COLUMNS. The 12th
International Symposium on Fiber Reinforced Polymers for Reinforced Concrete
Structures (FRPRCS-12) & The 5th Asia-Pacific Conference on Fiber
Reinforced Polymers in Structures (APFIS-2015) Joint Conference, 14-16 December
2015, Nanjing, China. Paper 015. 6 pages.
36.
Balanji,
EKZ, Sheikh, MN and Hadi, MNS (2015). MODELS FOR PREDICTING THE AXIAL
COMPRESSIVE STRENGTH OF STEEL FIBRE REINFORCED NORMAL AND HIGH STRENGTH
CONCRETE SQUARE COLUMNS The 12th International Symposium on Fiber Reinforced
Polymers for Reinforced Concrete Structures (FRPRCS-12) & The 5th
Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015)
Joint Conference, 14-16 December 2015, Nanjing, China. Paper 009. 6 pages.
37.
Wang,
W., Al-Baali, A, Sheikh, MN and Hadi, MNS (2015). BEHAVIOUR OF GFRP TUBE
REINFORCED CONCRETE COLUMNS UNDER ECCENTRIC LOADING. The 12th International
Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures
(FRPRCS-12) & The 5th Asia-Pacific Conference on Fiber Reinforced Polymers
in Structures (APFIS-2015) Joint Conference, 14-16 December 2015, Nanjing,
China. Paper 032. 6 pages.
38.
Karim,
H., Noel-Gough, B, Sheikh, MN and Hadi, MNS. (2015). STRENGTH AND DUCTILITY
BEHAVIOR OF CIRCULAR CONCRETE COLUMNS REINFORCED WITH GFRP BARS AND HELICES.
The 12th International Symposium on Fiber Reinforced Polymers for Reinforced
Concrete Structures (FRPRCS-12) & The 5th Asia-Pacific Conference on Fiber
Reinforced Polymers in Structures (APFIS-2015) Joint Conference, 14-16 December
2015, Nanjing, China. Paper 020. 6 pages.
39.
Khan,
QS, Strong, JS, Sheikh, MN and Hadi, MNS (2015). Flexural Testing of Concrete
Filled Fibre Reinforced Polymer Tubes (CFFT) with and without Internal Fibre
Reinforced Polymer (FRP) Reinforcement. 27th Biennial National Conference of
the Concrete Institute of Australia in conjunction with the 69th RILEM Week. 30
Aug. – 2 Sept Melbourne, pp. 400-407
40.
Zhao,
H and Hadi, MNS (2015). Using Conventional Materials as Concrete Confinement. .
27th Biennial National Conference of the Concrete Institute of Australia in
conjunction with the 69th RILEM Week. 30 Aug. – 2 Sept Melbourne, pp. 476-481.
41.
Hadi,
MNS and Tran, TM (2014). SEISMIC STRENGTHENING OF EXTERIOR RC BEAM-COLUMN
CONNECTIONS USING CONCRETE COVERS AND CFRP. 23rd Australasian Conference on the
Mechanics of Structures and Materials (ACMSM23) Byron Bay, Australia, 9-12
December 2014, pp. 435-440.
42.
Hadi,
MNS and Pham, TM (2014). MAXIMUM USABLE STRAIN OF FRP-CONFINED CONCRETE
CYLINDERS. 23rd Australasian Conference on the Mechanics of Structures and
Materials (ACMSM23) Byron Bay, Australia, 9-12 December 2014, pp. 453-458.
43.
Wang,
W, Sheikh, MN, Hadi, MNS and Lyons, B. (2014). Behaviour of GFRP Tube
Reinforced Concrete Columns under Axial Compression. Proceedings of The 7th
International Conference on FRP Composites in Civil Engineering (CICE 2014),
Vancouver, Canada. 20-22 Aug. 2014. Paper 68, 6 pages.
44.
Hadi,
MNS and Lei, X. (2014). Spline-Shape Modification for FRP-Confined Concrete
Columns: Theory And Evaluation. Proceedings of The 7th International Conference
on FRP Composites in Civil Engineering (CICE 2014), Vancouver, Canada. 20-22
Aug. 2014. Paper 64, 6 pages.
45.
Sharafi,
P., Teh, L. H. & Hadi, M. N. S. (2013). Theory Based Sensitivity Analysis
and Damage Detection of Steel Roof Sheeting for Hailstone Impact. In F. N.
Catbas, S. Pakzad, V. Racic, A. Pavic & P. Reynolds (Eds.), Topics in
Dynamics of Civil Structures - Proceedings of the 31st IMAC, A Conference on
Structural Dynamics (pp. 243-252). New York, United States: Springer.
46.
Sharafi,
P., Teh, L. H. & Hadi, M. N. S. (2013). Sizing optimization of trapezoidal
corrugated roof sheeting, supporting solar panels, under wind loading. In F. N.
Catbas, S. Pakzad, V. Racic, A. Pavic & P. Reynolds (Eds.), Topics in
Dynamics of Civil Structures - Proceedings of the 31st IMAC, A Conference on
Structural Dynamics (pp. 535-542). New York, United States: Springer.
47.
Tran,
T.M., Matuszkiewicz, B. and Hadi, MNS. (2013). Response of Substandard
Reinforcing Details T Connections Upgraded with Concrete Covers and CFRP.
Fourth Asia-Pacific Conference on FRP in Structures (APFIS 2013). 11-13
December 2013, Melbourne, Australia. 10 pages.
48.
Doan, L.V., Lei,X, Pham, T.M. and Hadi, MNS. (2013). Confinement
Effect of FRP and Transverse Steel on Retrofitting Square Concrete Columns.
Fourth Asia-Pacific Conference on FRP in Structures (APFIS 2013). 11-13
December 2013, Melbourne, Australia. 6 pages.
49.
Pham,
TM, Doan, L.V. and Hadi, MNS. (2013). Behaviour of Modified RC Columns
Retrofitted with CFRP. 26th Biennial Concrete Institute of Australia’s National
Conference (Concrete 2013). Gold Coast Convention and Exhibition Centre,
Queensland 16 to 18 October, 2013. 10 pages.
50.
Sharafi, P., Hadi, MNS
and Teh, L.H. (2013). A Methodology for Cost Optimization of the Layout Design
of Multi-Span Reinforced Concrete Beams. The Fourteenth International
Conference on Civil, Structural and Environmental Engineering Computing &
The Third International Conference on Soft Computing Technology in Civil,
Structural and Environmental Engineering. 3-6 September 2013. Cagliari -
Sardinia – Italy. 7 pages.
51.
Sharafi, P., Hadi, MNS
and Teh, L.H. (2013). A Novel Formulation for Optimum Conceptual Design of
Buildings of Rectangular Shapes. The Fourteenth International Conference on
Civil, Structural and Environmental Engineering Computing & The Third
International Conference on Soft Computing Technology in Civil, Structural and
Environmental Engineering. 3-6 September 2013. Cagliari - Sardinia – Italy. 7
pages.
52.
Le,
T. D., Lester M. T. and Hadi, M. N. S.
(2013). Effect of ply configuration on
hollow square reinforced concrete columns confined with Carbon fibre-reinforced
polymer (CFRP). Proceedings of the 22nd Australasian Conference on
the Mechanics of Structures and Materials, ACMSM 22, Sydney, 11-14 December
2012. pp. 107-112.
53.
Pham,
T. M., Lei, X. and Hadi, M. N. S. (2013). Effect of eccentric load on
retrofitted reinforced concrete columns confined with FRP. Proceedings of the
22nd Australasian Conference on the Mechanics of Structures and
Materials, ACMSM 22, Sydney, 11-14 December 2012. Pp. 139-144.
54.
Hadi,
M. N. S. (2012). Behaviour of FRP Wrapped High Strength Reinforced Concrete
Columns under Different Loading Conditions. The 7th Asian Symposium
on Polymers in Concrete, ASPIC 2012. Istanbul, Turkey, 3-5 Oct 2012. pp.
857-864.
55.
Sharafi,
P, Hadi, MNS and Teh, LH. (2012). Optimum Column Layout Design of Reinforced
Concrete Frames Under Wind Loading. J.M. Caicedo et al. (eds.), Topics on the
Dynamics of Civil Structures, Volume 1, Conference Proceedings of the Society
for Experimental Mechanics Series 26, Chapter 33, 17 pages.
56.
Sharafi,
P, Hadi, MNS and Teh, LH. (2012). Optimum Spans’ Lengths of Multi-span
Reinforced Concrete Beams Under Dynamic Loading. J.M. Caicedo et al. (eds.),
Topics on the Dynamics of Civil Structures, Volume 1, Conference Proceedings of
the Society for Experimental Mechanics Series 26, Chapter 35, 12 pages.
57.
Patel, V. I., Liang, Q. Q. and Hadi, M. N. S.
(2012). Nonlinear Inelastic Behavior of
Circular Concrete‐Filled Steel Tubular Slender Beam‐Columns with Preload Effects. 10th
Int Conf on Advances in Steel Concrete Composite and Hybrid Structures (ASCCS
2012). Singapore 2-4 July 2012. Paper no. 115, 8 pages.
58.
Liang, Q. Q., Patel, V. I. and Hadi, M. N. S.
(2012). Nonlinear Analysis of Biaxially
Loaded High Strength Rectangular Concrete‐Filled Steel Tubular Slender Beam‐Columns, Part I: Theory. 10th
Int Conf on Advances in Steel Concrete Composite and Hybrid Structures (ASCCS
2012). Singapore 2-4 July 2012. Paper no. 116, 8 pages.
59.
Liang, Q. Q., Patel, V. I. and Hadi, M. N. S.
(2012). Nonlinear Analysis of Biaxially
Loaded High Strength Rectangular Concrete‐Filled Steel Tubular Slender Beam‐Columns, Part II: Applications. 10th
Int Conf on Advances in Steel Concrete Composite and Hybrid Structures (ASCCS
2012). Singapore 2-4 July 2012. Paper no. 117, 8 pages.
60.
Hadi,
M. N. & Fanggi, B. (2012). Behaviour
of FRP confined concrete cylinders under different temperature exposure. In
F. Biondini & D. Frangopol (Eds.), 6th International Conference on Bridge
Maintenance, Safety and Management, IABMAS 2012 (pp. 1187-1192).
61.
Lei,
X., Pham, T. Minh. & Hadi, M. N. S. (2012). Comparative behaviour of FRP confined square concrete columns under
eccentric loading. In F. Biondini & D. Frangopol (Eds.), 6th
International Conference on Bridge Maintenance, Safety and Management, IABMAS
2012 (pp. 1207-1214).
62.
Hadi,
MNS, Sharafi, P and Teh, LH. (2012). (2012). A New Formulation for the Geometric Layout Optimisation of Flat Slab
Floor Systems. The Australasian
Structural Engineering Conference (ASEC 2012) July 11 - 13, 2012 at the Perth Convention
and Exhibition Centre (PCEC), Perth Western Australia. Paper 017, 8 pages.
63.
Lei,
X, Pham, TM and Hadi, MNS. (2012). Behaviour
of CFRP Wrapped Square RC Columns under Eccentric Loading. The Australasian
Structural Engineering Conference (ASEC 2012) July 11 - 13, 2012 at the Perth
Convention and Exhibition Centre (PCEC), Perth Western Australia. Paper 054, 8
pages.
64.
Hadi, MNS and Saeed Alrudaini, T.M. (2012). A New Cable System to Prevent Progressive
Collapse of Reinforced Concrete Buildings. Structures Congress 2012 ASCE Proceedings
of the 2012 Structures Congress, Chicago, Illinois March 29-31, 2012, pp. 257-267.
65.
Hadi,
MNS and Widiarsa, BR
(2012). Performance of CFRP Wrapped
Square Reinforced Concrete Columns Subjected to Eccentric Loading. Proceedings of The 2nd International
Conference on Rehabilitation and Maintenance in Civil Engineering (ICRMCE – 2)
Solo, Indonesia, 08-10 March 2012, pp. 375-386.
66.
Hadi,
MNS and Widiarsa, BR (2011). Behaviour of FRP
Wrapped Square Reinforced Concrete Columns under Eccentric Loading. The Concrete Institute of
67.
Fanggi,
BAL and Hadi, MNS (2011). The Behaviour
of Carbon Fibre Reinforced Polymer Confined Concrete Cylinders under High
Temperature Exposure. The Concrete
Institute of
68.
Hadi, MNS and
69.
Hadi, MNS and Saeed Alrudaini, T.M (2011). Preventing the Progressive Collapse of
Reinforced Concrete Buildings. The Thirteenth International Conference on
Civil, Structural and Environmental Engineering Computing (CC2011), Chania,
Crete, Greece on 6-9 September 2011. Paper 63, 12 Pages
70.
Uz ME and Hadi, MNS (2011). Seismic history analysis of
asymmetrical adjacent buildings with soil-structure interaction consideration.
8th International Conference on Earthquake Resistant Engineering
Structures (ERES 2011) which was held on 7 - 9 September 2011 at Chianciano
Terme, Italy, pp. 225-236.
71.
Hadi, MNS and Yazici, V (2011). Testing FRP Confined Columns under
Eccentric Loading. ISEC-6,
The Sixth International Structural Engineering and Construction
Conference Zürich,
June 21-26, 2011. pp. 569-573
72.
Hadi, MNS and
73.
Zhao, H and Hadi, MNS (2011). Experimental Investigation on Using Mesh as Confinement materials for
High Strength Concrete Columns. The Twelfth East Asia-Pacific Conference on
Structural Engineering and Construction (EASEC-12), Hong Kong Convention and
Exhibition Centre (HKCEC), Hong Kong SAR,
74.
Hadi, MNS (2011). External
Reinforcement of Concrete Columns. 11th Underground Coal
Operators' Conference, 10-11 Feb 2011,
75. Yazici, V and Hadi, MNS (2011). Increasing the flexural stiffness of FRP wrapped reinforced concrete columns. The 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM21), Victoria University (VU), Melbourne, Australia., 7-10 December 2010. pp. 161-165.
76. Hadi, MNS and Saeed Alrudaini, T.M (2011). A new system for reinforced concrete buildings to prevent potential progressive collapse. The 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM21), Victoria University (VU), Melbourne, Australia., 7-10 December 2010. pp. 173-177.
77.
78. Uz ME and Hadi, MNS (2011). Investigating the Effect of Pounding for Inelastic Base Isolated Adjacent Buildings under Earthquake Excitations. The 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM21), Victoria University (VU), Melbourne, Australia., 7-10 December 2010. pp. 329-334.
79.
Hadi, MNS. (2010). Behaviour
of FRP Wrapped Circular High Strength Concrete Columns under Different Loading
Conditions. RTA Annual Bridge Conference Bridges: Maximising Service Life
01—02 December 2010.
80.
Hadi, MNS and
81.
Yazici, V and Hadi, MNS (2010). Limiting
the Slenderness Effect due to FRP Wrapping in Reinforced Concrete Columns. The
Ninth International Congress on Advances in Civil Engineering (ACE 2010),
82.
Saeed Alrudaini, T.M and Hadi, MNS (2010). A New Design to Prevent Progressive
Collapse of Reinforced Concrete Buildings. The 5th Civil Engineering
Conference in the Asian Region and Australasian Structural Engineering
Conference 2010 CECAR 5/ASEC 2010, 8-12 Aug
83.
Zhao, H and Hadi, MNS (2010). Investigation on the Viability of Using Fly Mesh as External
Confinement for High Strength Concrete Columns. The 5th Civil Engineering
Conference in the Asian Region and Australasian Structural Engineering
Conference 2010 CECAR 5/ASEC 2010, 8-12 Aug
84.
Rashidi, M and Hadi, MNS (2010). Modelling of High Strength Concrete Reinforced Columns Wrapped with FRP.
The 5th Civil Engineering Conference in the Asian Region and Australasian
Structural Engineering Conference 2010 CECAR 5/ASEC 2010, 8-12 Aug
85.
Hadi, MNS and Uz ME (2010). Inelastic Base Isolated Adjacent Buildings under Earthquake Excitation with
the Effect of Pounding. The 5th Civil Engineering Conference in the Asian
Region and Australasian Structural Engineering Conference 2010 CECAR 5/ASEC
2010, 8-12 Aug
86.
87.
Hadi, MNS and Yazici, V (2009). Behaviour of FRP Wrapped Circular Reinforced Concrete Columns. The
Fifth International Structural Engineering and Construction Conference September
21-27, 2009
88.
Hadi, MNS and Kusumawardaningsih, Y (2009). Experimental investigation of FRP wrapped
RC circular and square hollow columns. The Fifth International Structural
Engineering and Construction Conference September 21-27, 2009
89.
Kusumawardaningsih, Y and Hadi, MNS (2009). Concentric Loading of FRP Confined High
Strength RC Columns. 24th Biannual Conference of the Concrete Institute of
90.
Hadi, MNS and
91.
Kusumawardaningsih, Y and Hadi, MNS (2009). Experimental Investigation of FRP Wrapped
Hollow RC Columns. FRPRCS-9, 9th International Symposium on Fiber
Reinforced Polymer Reinforcement for Concrete Structures,
92.
Yazici, V and Hadi, MNS (2009). Behaviour of FRP Wrapped Circular Concrete Columns. FRPRCS-9, 9th
International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete
Structures,
93.
94.
Jeffry, R and Hadi, MNS (2009). Improving the Strength and Ductility of High Strength Reinforced
Concrete Beams. 10TH INTERNATIONAL CONFERENCE ON CONCRETE ENGINEERING AND
TECHNOLOGY CONCET’09,
95. Yazici, V and Hadi, MNS (2009). Interaction Diagrams for FRP Wrapped Circular Hollow Columns. Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials, editors T. Aravinthan, W. Karunasena and H. Wang, CRC Press, Toowoomba, Australia, 2-5 Dec 2008. pp. 55-60.
96. Jeffry, R and Hadi, MNS (2009). Improving the Ductility of Over-Reinforced HSC Beams Using Different Helix Diameters. Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials, editors T. Aravinthan, W. Karunasena and H. Wang, CRC Press, Toowoomba, Australia, 2-5 Dec 2008. pp. 457-462.
97.
Hadi, MNS (2008). An
Investigation of the Behaviour of Steel and Polypropylene Fibre Reinforced
Concrete Slabs. Harnessing Fibres for
Concrete Construction, Proceedings of the Int Conf .
98.
Jeffry, R and Hadi, MNS (2008). The Effect of Confinement Shapes on Over Reinforced HSC Beams.
Proceedings of
99.
Hadi, MNS (2008). Behaviour
of Fibre RC Columns Wrapped with FRP under Eccentric Loads. Australasian
Structural Engineering Conference (ASEC), 26 – 27 June 2008,
100. Hadi, MNS (2008). Strengthening reinforced concrete T connections by steel straps. First International Symposium on Life-Cycle Civil Engineering (IALCCE’08), Life-Cycle Civil Engineering – Biondini & Frangopol (eds), Taylor & Francis Group, London, ISBN 978-0-415-46857-2,Varenna, Lake Como, Italy, June 11-14, 2008. pages. 565-570.
101.
Hadi, MNS (2007). Eccentric
Loading of FRP Confined Reinforced Concrete Columns. The 23rd Biennial Conference of the Concrete Institute of
102.
Liang, QQ and Hadi, MNS (2007). Nonlinear Analysis and Behavior of Concrete-Filled Steel Tubular Beam-Columns.
4th International Structural Engineering
and Construction Conference, ISEC – 4. “Innovations in Structural
Engineering and Construction”, Editors Y.M. Xie and I. Patnaikuni, Balkema,
Taylor & Francis,
103.
Hadi, MNS (2007). Behaviour
of fibre reinforced concrete slabs. 4th
International Structural Engineering and Construction Conference, ISEC – 4.
“Innovations in Structural Engineering and Construction”, Editors Y.M. Xie and
I. Patnaikuni, Balkema, Taylor & Francis,
104. Arfiadi, Y Hadi, MNS (2007). Determination of Prestressing Forces in Statically Indeterminate Structures. The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, organised by Civil-Comp Press in St. Julians, Malta, 18-21 September 2007. Paper 180, 18 pages.
105. Hadi, MNS (2007). Modelling of High Strength Concrete Reinforced with Helical Reinforcement. The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, organised by Civil-Comp Press in St. Julians, Malta, 18-21 September 2007. Paper 174, 18 pages.
106. Salehi, M and Hadi, MNS (2007). Continuous Unidirectional Carbon Fibre-Reinforced Concrete Beams. The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, organised by Civil-Comp Press in St. Julians, Malta, 18-21 September 2007. Paper 168, 17 pages.
107.
Hadi, MNS (2007). Behaviour
of FRP Wrapped Circular Concrete Columns under Eccentric Loading. Fiber-Reinforced Polymer Reinforcement for
Concrete Structures. Proceedings of the 8th International
Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures,
FRPRCS-8.
108.
Hadi, MNS (2007). Eccentric
Loafing of Externally Confined Fibre Reinforced Concrete Columns. Progress in Mechanics of Structures and
Materials. Proceedings of the 19th Australasian Conference on
the Mechanics of Structures and Materials. Editors Peter J Moss and Rajesh P
Dhakal.
109. Hadi, MNS (2006). Eccentric Loading of FRP Wrapped Concrete Columns. 7th International Congress on Advances in Civil Engineering, ACE 2006, Yildiz Technical University, October 11-13, 2006. Paper ace-403, 10 pages.
110.
Jalallifar, H, Aziz, N and Hadi, MNS. (2006). Bolt
Failure Mechanism under Lateral Loading Conditions. 2nd
International Conference on:” Advances in Mineral Resources Management and
Environmental Geotechnology”,
111.
Hadi, MNS (2006). Behaviour of FRP wrapped HSC
concrete columns under eccentric loading. Materials, Experimentation,
Maintenance and Rehabilitation. Proceedings of the Tenth East Asia-Pacific
Conference on Structural Engineering and Construction (EASEC-10). August 3-5,
2006,
112.
Jalalifar, H, Aziz, NIA, and Hadi, MNS. (2006). An
Assessment of Load Transfer Mechanism Using the Instrumented Bolts. Coal
2006, 7th Underground Coal Operators’ Conference, Sustainable Coal Mine
Development Constraint,
113.
Hadi, MNS. (2006). Behaviour of FRP Wrapped Concrete
Columns under Eccentric Loading. Concrete Solutions, Proceedings of the
Second International Conference, BRE Press. Editors MG Grantham, RM Jauberthie
and C Lanos, St
114.
Hadi, MNS. (2006). Fibre Reinforcing the Cover of
Concrete Columns. 1st International Structural Specialty Conference. 2006
Annual Conference of The Canadian Society for Civil Engineering.
115.
Hadi, MNS. (2006). Behaviour of FRP Wrapped HSC
Columns under Eccentric Loads. 1st International Structural Specialty
Conference. 2006 Annual Conference of The Canadian Society for Civil
Engineering.
116.
Jalalifar, H, Aziz, NIA, and Hadi, MNS (2005). Rock
and Bolt Properties and Load Transfer Mechanism in Ground Reinforcement.
Proceedings of the 20th World Mining Congress 2005, 7-11/11/2005
117.
Hadi, MNS (2005). Behaviour of FRP Wrapped HSC
Columns under Loads with Different Eccentricities. ISEC-03 Third
International Structural Engineering and Construction Conference,
“Collaboration and Harmony of Creative Systems“,
118.
Hara, T and Hadi, MNS (2005). Behavior of
Eccentrically Loaded Concrete Columns with FRP Wrapping. ISEC-03 Third
International Structural Engineering and Construction Conference, “
Collaboration and Harmony of Creative Systems “, Editor T. Hara,
119.
Hadi, MNS and Elbasha, N. (2005). The Effect of
Helical Pitch on the Behaviour of Helically Confined HSC Beams. Australian
Structural Engineering Conference, ASEC 2005.
120.
Hara, T and Hadi, MNS (2005). Behaviour of High
Strength Concrete Columns under Eccentric Loading. The Tenth International
Conference on Civil, Structural and Environmental Engineering Computing
121.
Arfiadi, Y and Hadi, MNS (2005). Supplemental
Hydraulic Dampers for Buildings. The Tenth International Conference on
Civil, Structural and Environmental Engineering Computing
122.
123. Hadi, MNS and Montgomery, DG (2005). Fibre Reinforcing Concrete Columns. ConMat’05 Third International Conference on Construction Materials: Performance, Innovations and Structural Implications. Paper number 65. 10 pages.
124.
Hadi, MNS (2005). Behaviour of Wrapped Concrete
Columns under Eccentric Loads. Third International Conference Composites in
Construction CCC2005.
125.
Hadi, MNS and Montgomery, DG (2005). Investigation
of Fibre Reinforcing the Cover of Concrete Columns. Global Construction:
Ultimate Concrete Opportunities. Proceedings of Cement Combinations for Durable
Concrete. 5-7 July 2005,
126.
Jalalifar, H, Aziz, N and Hadi, MNS (2005). Modelling
Shearing Characteristics of Reinforced Concrete. Global Construction:
Ultimate Concrete Opportunities. Proceedings of Application of Codes, Design
and Regulations, 5-7 July 2005,
127.
Aziz, N, Jalalifar, H and Hadi, MNS (2005). The
Effect pf Resin Thickness on Bolt-Grout-Concrete Interaction in Shear. Proceedings
of COAL2005 – 6th Australasian Coal Operator’s Conference.
128.
Hadi, MNS and Montgomery, DG (2004). An
investigation of fibre reinforcing concrete columns’ cover. Development in Mechanics of Structures and Materials,
Proceedings of The 18th Australasian Conference on the Mechanics of Structures
and Materials (ACMSM 18). Editors A.J. Deeks and H. Hao.
129.
Hadi, MNS (2004). Eccentric Loading of Externally
Confined Concrete Columns. Development in Mechanics of Structures and
Materials, Proceedings of The 18th Australasian Conference on the Mechanics of
Structures and Materials (ACMSM 18). Editors A.J. Deeks and H. Hao.
130.
Hadi, MNS (2004). Using Fibres to Enhance the Properties
of Concrete Columns. Proceedings of the 7th International Conference on
Concrete Technology in Developing Countries. Innovation and Emerging
Technology in Concrete Industry. 5 – 8 October 2004.
131.
Hadi, MNS and
132.
Aziz, N, Jalalifar, H and Hadi, MNS (2004). The
Effect of Rock Strength on Shear Behaviour of Fully Grouted Bolts. Ground
Support in Mining and Underground Construction. Proceedings of the
Fifth Int Sym on Ground Support.
133.
Hadi, MNS (2004). Eccentric Loading of Externally
Confined Concrete Columns. Int Conf on Bridge Engineering &
Hydraulic Structures, BHS2004.
134.
135.
Hadi, MNS (2004). Strength and Ductility of FRP
Wrapped Columns Under Eccentric Loads. 4th International Conference on
Advanced Composite Materials in Bridges and Structures.
136. Hadi, MNS and Montgomery, DG (2004). Strength and Ductility of Wrapped HSC Columns under Eccentric Loads. The Second International Conference on Structural Engineering, Mechanics and Computation, SEMC 2004, Cape Town, South Africa, 5-7 July 2004. pp. 1557-1562.
137.
James, B., Lefoe, G. and Hadi, MNS. (2004). Working
'through' graduate attributes: A bottom-up approach. In F. Sheehy & B.
Stauble (Eds.), Transforming knowledge into Wisdom: Holistic Approaches to
Teaching and Learning. Proceedings of Higher Education Research and
Development Society. Vol. 27, 4-7 July, Miri,
138.
Hara, T and Hadi, MNS (2004). Behavior of R/C Beam with
Helical Reinforcement under Bending. Concrete under Severe Conditions:
Environment and Loading, CONSEC’04. June 27-30,
139.
Jalalifar, H, Aziz, NI and Hadi, MNS. (2004). Shear
Behaviour of Bolts in Joints with Increased Pressure Conditions. Roofbolting
in Mining,
140.
Hadi, MNS and Kelly, D. (2004). Effectiveness of
Concrete Safety Barriers.
141.
142.
143.
Jalalifar, H, Aziz, NI, and Hadi, MNS (2004). Modelling
of Sheared Behaviour Bolts Across Joints. Coal 2004, 5th
Underground Coal Operators’ Conference, Coal Mine Planning. Editors, NI
Aziz and B. Kininmonth, University of
144.
Arfiadi, Y and Hadi, MNS (2003). Nonlinear
Controllers with Bounded Magnitude of Control Forces. The Ninth East Asia-Pacific Conference on Structural Engineering and
Construction, EASEC9.
145.
Hadi, MNS (2003). Testing Eccentrically Loaded
Externally Reinforced High Strength Concrete Columns. The Second
International Structural Engineering and Construction Conference (ISEC-02),
146.
Hadi, MNS (2003). Helically Reinforced High Strength
Concrete Beams. The Second International Structural Engineering and Construction
Conference (ISEC-02),
147.
Hadi, MNS and
148. Arfiadi, Y. and Hadi, MNS. (2003). Continuous Bounded Controller for Active Control Structures. The Ninth International Conference on Civil and Structural Engineering Computing. Editor BHV Topping. Egmond aan Zee, The Netherlands 2-4 September. Paper 115, 14 pages.
149. Bodhinayake, B.C. and Hadi, M.N.S. (2003). A Design Chart for the Design of Flexible Pavements Based on Finite Elements. The Ninth International Conference on Civil and Structural Engineering Computing. Editor BHV Topping. Egmond aan Zee, The Netherlands 2-4 September. Paper 26, 15 pages.
150.
Li, J., Moulsdale, M. and Hadi, MNS. (2003). Externally
Confined High Strength Concrete Columns under Eccentric Loading. 6th
International Symposium on Fibre-Reinforced Polymer (FRP) Reinforcement for
Concrete Structures (FRPRCS-6), 8 - 10 July 2003,
151.
Xiong, Z. H. and Hadi, MNS. (2003). Strength
Analysis Of Sheared Beams Retrofitted with Strengthening Materials. 6th
International Symposium on Fibre-Reinforced Polymer (FRP) Reinforcement for
Concrete Structures (FRPRCS-6), 8 - 10 July 2003,
152.
153. Hadi, MNS (2003). Enhancing the Ductility and Strength of HSC Beams Reinforced with HSS. Concrete Institute of Australia 21st Biennial Conference 2003 "Concrete In The 3rd Millennium" 17 - 19 July 2003. pp. 109-118.
154. Hadi, MNS, Li, J, Moulsdale, M (2003). Strength And Ductility Of Wrapped HSC Columns Under Eccentric Loads. Concrete Institute of Australia 21st Biennial Conference 2003 "Concrete In The 3rd Millennium" 17 - 19 July 2003. pp. 79-88.
155. Hadi, MNS (2002). Optimum Design of Reinforced Concrete Structures Using Neural Networks. Applied Mechanics and Progress. Proceedings of The Third Australasian Congress on Applied Mechanics, ACAM 2002, 20th - 22nd February 2002, Sydney, Australia. World Scientific. ISBN. 981-02-4867-9. pp. 569-574.
156. Alvani, K.S. and Hadi, MNS (2002). Discrete Optimization of Truss Structures with Geometrically Non-Linear Behaviour Using Genetic Algorithms, Applied Mechanics and Progress. Proceedings of The Third Australasian Congress on Applied Mechanics, ACAM 2002, 20th - 22nd February 2002, Sydney, Australia. World Scientific. ISBN. 981-02-4867-9. pp. 575-580.
157.
Arfiadi, Y. and Hadi, MNS (2002). Development of
Matrix Method Based Structural Analysis Toolbox in Matlab. The Sixth
International Conference on Computational Structures Technology.
158.
Hadi, MNS and Arfiadi, Y (2002). Optimum Design and
Performance of Multi Tuned Mass Damper Systems. The Sixth International
Conference on Computational Structures Technology.
159.
Hadi, MNS and Schmidt, LC. (2002). Enhancing the
properties of reinforced concrete beams by using helical reinforcement.
Concrete for Extreme Conditions, Proceedings of the International Congress -
Challenges of Concrete Construction, Edited by RK Dhir, MJ McCarthy and MD
Newlands. Thomas Telford.
160.
Hadi, MNS and
161. Hadi, MNS (2002). The Behaviour of High Strength Concrete Columns Reinforced with High Strength Steel. ACE 2002, Advances in Civil Engineering, Fifth International Congress, Istanbul Technical University, Istanbul, Turkey. Editors: S. Pala and A Ilki. ISBN 975-561-222-X. 25-27 September 2002. pp. 527-536.
162. Hadi, MNS and Schmidt, LC. (2002). High Strength Concrete Columns Reinforced with High Strength Steel. The 6th International Conference on Concrete Technology for Developing Countries. Editor: M. Resheidat, Al-Balqa’ Applied University, ISBN 9957-31-002-X. 21-24 October 2002. volume 2, pp. 753-762.
163. Hadi, MNS and Schmidt, LC. (2002). Effect of Helical Reinforcement on The Behaviour of Reinforced Concrete Beams. The 6th International Conference on Concrete Technology for Developing Countries. Editor: M. Resheidat, Al-Balqa’ Applied University, ISBN 9957-31-002-X. 21-24 October 2002. volume 3, pp. 783-790.
164. Hadi, MNS (2001). Behaviour of High Strength Concrete Columns Confined with Helices. ACUN–3 International Composites Conference Technology Convergence in Composites Applications. Editors Sri Bandyopadhyay, N Gowripalan and N Drayton, ISBN 0 7334 0791 9, University of New South Wales, Sydney, Australia, 6 – 9 February, 2001. pp.117-123.
165.
Hadi, MNS and
166.
Hadi, MNS
(2001). Investigation of the Bond
of High Strength Concrete with High Strength Steel. The Second International
Conference on Mechanics of Structures, Materials and Systems, MSMS 2001. Editors
MNS Hadi, LC Schmidt and A Basu, ISBN 0 86418 656 8,
167.
Hadi, MNS
(2001). Neural Network
Applications in Concrete Structures.
The Second International Conference on
Mechanics of Structures, Materials and Systems, MSMS 2001. Editors MNS
Hadi, LC Schmidt and A Basu, ISBN 0 86418 656 8,
168.
Hadi, MNS.
(2001). Bond of High Strength
Concrete with High Strength Steel. Australasian
Structural Engineering Conference (ASEC), incorporating the Fifth
International Kerensky Conference of the Institution of Structural Engineers,
169.
Hadi, MNS.
(2001). Optimisation of the
Design of Reinforced Concrete Continuous Beams by Genetic Algorithms. Australasian Structural Engineering
Conference (ASEC), incorporating the Fifth International Kerensky
Conference of the Institution of Structural Engineers,
170. Cooper, P, Arfiadi, Y, Croker, A and Hadi, MNS (2001). Transient Heat Transfer in Buried Pipelines During Hydrostatic Testing. CHT01 - Advances in Computational Heat transfer II - QLD May, publ. Begell House, ISBN 1-56700-158-0, vol. 1, pp 341-348.
171.
Hadi, MNS and
172. Hadi, MNS and Schmidt, LC (2001). Helically Confined Reinforced Concrete Beams. 2001Second International Conference on Engineering Materials, Editors: Shigeyoshi Nagataki, Akthem Al-Manaseer and Kenji Sakata, Japan Society of Civil Engineers (JSCE) and Canadian Society for Civil Engineering (CSCE), ISBN 1-894662-00-8, San Jose, California, USA August 16-19. Vol. 1, pp. 369-376.
173. Hadi, MNS (2001). High Strength Concrete Columns Reinforced with High Strength Steel. 2001 Second International Conference on Engineering Materials, Editors: Shigeyoshi Nagataki, Akthem Al-Manaseer and Kenji Sakata, Japan Society of Civil Engineers (JSCE) and Canadian Society for Civil Engineering (CSCE), ISBN 1-894662-00-8, San Jose, California, USA August 16-19. Vol. 1, pp. 673-682.
174.
Hadi, MNS (2001). Optimum Design of Continuous Beams.
Advances in Computational Engineering & Sciences, ICES'01.
Editors: S.N. Atluri, T. Nishioka and M. Kikuchi. Tech Science Press, 19-26
August 2001;
175.
Hadi, MNS (2001). Using Neural Networks in
Reinforced Concrete Design. Advances in Computational Engineering &
Sciences, ICES'01. Editors: S.N. Atluri, T. Nishioka and M. Kikuchi.
Tech Science Press, 19-26 August 2001;
176.
Hadi, MNS and Arfiadi, Y. (2001). Using genetic
algorithm for optimal control force in active vibration control. Advances
in Earthquake Engineering – Earthquake Resistant Engineering Structures III.
Wessex Institute of Technology, UK & Calpe Institute of
177.
Hadi, MNS (2001). Challenges Facing Engineering. New Engineering Competencies – Changing the Paradigm! Proceedings of
the SEFI Annual Conference. European Society for Engineering Education.
ISBN 2-87352-043-4.
178.
Hadi, MNS (2001). Optimum Design of Reinforced
Concrete Continuous Beams by Genetic Algorithms. Proceedings of The
Eighth International Conference on Civil and Structural Engineering Computing.
Editor: B.H.V. Topping. ISBN 0-948749-77-6. Paper number 57. Eisenstadt, nr
179.
Hadi, MNS and Bodhinayake B. C. (2001). A Study on
the Effect of Static and Cyclic Loading and Linear and Non-Linear Material
Properties in the Analysis of Flexible Pavements by Finite Element Modelling.
Proceedings of The Eighth International Conference on Civil and Structural
Engineering Computing. Editor: B.H.V. Topping. ISBN 0-948749-77-6. Paper
number 74. Eisenstadt, nr
180. Hadi, MNS and Schmidt, LC (2000). On the Use of Helices for Enhancing the Properties of Reinforced Concrete Beams. The International Composites Conference, ACUN – 2, Composites in the Transportation Industry, Editors Sri Bandyopadhyay, N. Gowripalan, N. Drayton and R. Heslehurst, ISBN 0 7334 0698, NSW, Sydney, Australia 14 – 18 Feb, pp. 143-148.
181. Arfiadi, Y. and Hadi, MNS (2000). Hybrid Base Isolation-Passive Mass Damper Systems. Computing in Civil and Building Engineering, Proceedings of The 8th International Conference on Computing in Civil and Building Engineering (VIII-ICCCBE), 14-17 August, Stanford University, Editors: Renate Fruchter, Feniosky Pena-Mora and W.M. Kim Roddis, ISBN 0-7844-0513-1, ASCE, Vol. 1, pp. 279-286.
182. Hadi, MNS and Malik, AA (2000). Designing Flexible Pavements by Finite Elements. Computing in Civil and Building Engineering, Proceedings of The 8th International Conference on Computing in Civil and Building Engineering (VIII-ICCCBE), 14-17 August, Stanford University, Editors: Renate Fruchter, Feniosky Pena-Mora and W.M. Kim Roddis, ISBN 0-7844-0513-1, ASCE, Vol. 2, pp. 1503-1510.
183. Hadi, MNS, Arfiadi, Y and Kandalaft, R (2000). Optimisation of Rigid Pavement Design By Genetic Algorithm. Advances in Computational Engineering & Sciences, Editors: Satya N. Atluri and Frederick W. Brust, USA, ISBN 0-9657001-3-5, Vol. II, pp. 1604-1609.
184. Hadi, MNS and Malik, AA (2000). Designing Flexible Pavements by FlexiPave. Advances in Computational Engineering & Sciences, Editors: Satya N. Atluri and Frederick W. Brust, USA, ISBN 0-9657001-3-5, Vol. II, pp. 1568-1573.
185.
Hadi, MNS, Aziz, N.I and
186.
Hadi, MNS and
Erskine, JP (2000). Influence of Pavement Rehabilitation on Roughness.
187.
188.
Hadi, MNS (2000). Optimum Design of Reinforced
Concrete T beams by Genetic Algorithms. 4th Asia-Pacific Structural
Engineering and Construction Conference: APSEC 2000, September 13-15,
189.
Hadi, MNS and Schmidt, LC (2000). Axial Behaviour of
High Strength Concrete Columns with High Strength Steel. 4th Asia-Pacific
Structural Engineering and Construction Conference: APSEC 2000, September
13-15,
190.
Hadi, MNS and
Kandalaft, R (2000). Optimum
Design of Reinforced Concrete Beams by Genetic Algorithms. Advances in Civil Engineering, IV.
International Conference, 1-3 November 2000 Eastern Mediterranean University,
191.
Hadi, MNS
(2000). Behaviour of Confined High Strength Concrete. Advances in
Civil Engineering, IV. International Conference, 1-3 November 2000 Eastern
Mediterranean University,
192.
Hadi, MNS and Schmidt, LC. (2000). Using
Genetic Algorithms to Find the Optimum Design of Reinforced Concrete Beams.
2000 Australasian MATLAB User conference. 9-10 November,
193.
Arfiadi, Y, Hadi, MNS and Schmidt, LC (2000). GA-H2/H¥
Static Controllers for Buildings during Earthquake. International ICSC
Congress on INTELLIGENT SYSTEMS AND APPLICATIONS (ISA'2000), University of
194.
Hadi,
MNS and Morris, CE (1999). Extending
the Engineering Opportunity Programme at the
195.
Hadi,
MNS, Malik, AA and
196.
Arfiadi,
Y and Hadi, MNS. (1999). Effect
of Hybrid Mass Dampers on Three Dimensional Asymmetric Structures. International
Conference on Mechanics of Structures, Materials and Systems, MSMS’99. Editors
MNS Hadi and LC Schmidt, ISBN 0 86418 588 X,
197.
Ozolins,
GE, Hamsagr, R, Hadi, MNS and Schmidt, LC. (1999) Ductility of High-Strength Reinforced-Concrete Beams. International
Conference on Mechanics of Structures, Materials and Systems, MSMS’99. Editors
MNS Hadi and LC Schmidt, ISBN 0 86418 588 X,
198.
Das, S
and Hadi, MNS. (1999). Lessons
Learned from Progressive Collapse of Building Structures. International
Conference on Mechanics of Structures, Materials and Systems, MSMS’99. Editors
MNS Hadi and LC Schmidt, ISBN 0 86418 588 X,
199.
Hadi,
MNS and Symons, MG. (1999). Predicting
the Behaviour of Recycled Road Pavements. International Conference on
Mechanics of Structures, Materials and Systems, MSMS’99. Editors MNS Hadi
and LC Schmidt, ISBN 0 86418 588 X,
200.
Hadi,
MNS,
201.
Hadi,
MNS and Morris, CE (1999). Open
Day and Engineering Thesis in the
202.
Hadi,
MNS and Schmidt, LC (1999). Enhancing
the Performance of High Strength Concrete Reinforced with High Strength Steel
by Using Helical Reinforcement. The
9th BCA Annual Conference on Higher Education and the Concrete Industry,
British Cement Association, ISBN 0 72101548 4,
203.
Hadi,
MNS, Aziz, NI, Morris, CE and
204.
Hadi,
MNS and Arfiadi, Y (1999). Application
of Genetic Algorithms for the Optimum Design of Rigid Pavements. The 7th International
Conference on Civil & Structural Engineering Computing,
205.
Arfiadi,
Y and Hadi, MNS (1999). Active
Vibration Control Designs of Civil Structures Using Real Coded Genetic
Algorithms. The 7th
International Conference on Civil & Structural Engineering Computing,
206.
Hadi, MNS, Aziz, NI and Morris, CE (1999). Engineering Opportunity Programme at the
207.
Aziz, NI,
Hadi, MNS, and Morris, CE (1999). Engineering Thesis at the
208.
Hadi,
MNS (1999). Optimum Design of
Rigid Road Pavements Based on Genetic Algorithm. XX1st WORLD ROAD CONGRESS,
209.
Hadi,
MNS and Schmidt, L.C. (1999). Analysis
of Helically Confined Reinforced Concrete Beams. Compumod’s Thirteenth
Australasian Users’ Conference. Melbourne, 12-13 October, ISBN 0 646 37100
2, pages 11.1-11.11.
210.
Hadi,
MNS and Bodhinayake, B.C. (1999). Analysis
of Flexible Pavements by Finite Element Modelling: A Comparative Study. Compumod’s
Thirteenth Australasian Users’ Conference. Melbourne, 12-13 October, ISBN 0
646 37100 2, pages 34.1-34.12.
211.
Hadi,
MNS and Schmidt, LC (1999). Using
Helices to Enhance the Performance of High Strength Concrete Beams. Proceedings
of the 16th Australasian Conference on Mechanics of Structures and
Materials, Editors M.A. Bradford, R.Q. Bridge and S.J. Foster, ISBN 90 5809
107 4, A.A. Balkema/Rotterdam/Brookfield, Sydney 8-10 December, pp. 169-174.
212.
Hadi,
MNS and Arfiadi, Y (1999). Optimum
Rigid Road Pavement Design Using Genetic Algorithm. Proceedings of the 16th
Australasian Conference on Mechanics of Structures and Materials, Editors
M.A. Bradford, R.Q. Bridge and S.J. Foster, ISBN 90 5809 107 4, A.A.
Balkema/Rotterdam/Brookfield, Sydney 8-10 December, pp. 747-752.
213.
Hadi,
MNS and Arfiadi, Y (1999). Real
Coded Genetic Algorithms for Active Control Force Optimisation. Proceedings
of the 16th Australasian Conference on Mechanics of Structures and
Materials, Editors M.A. Bradford, R.Q. Bridge and S.J. Foster, ISBN 90 5809
107 4, A.A. Balkema/Rotterdam/Brookfield, Sydney 8-10 December, pp. 711-716.
214.
Arfiadi,
Y and Hadi, MNS (1999). Seismic
Response of Three Dimensional Asymmetric Buildings. Proceedings of the 16th
Australasian Conference on Mechanics of Structures and Materials, Editors
M.A. Bradford, R.Q. Bridge and S.J. Foster, ISBN 90 5809 107 4, A.A.
Balkema/Rotterdam/Brookfield, Sydney 8-10 December, pp.545-550.
215.
Malik, AA and Hadi, MNS (1998). FlexiPave: A Program for the Structural Analysis of Flexible and
Recycled Pavements. Second
International Conference on Environmental Management (ICEM2). Eds.
Sivakumar and Chowdhury, Published by Pergamon,
216.
Hadi, MNS
(1998). Cost Optimum Design of
Rigid Road Pavements. 19th
217. Arfiadi, Y and Hadi, MNS (1998). On the Use of Genetic Algorithm for Optimal Control Force in Active Vibration Control. Australasian Conference on Structural Optimisation (ACSO’98). Eds. Steven, Querin, Guan and Xie, Published by Oxbridge, Sydney 11-13 February, pp. 207-214.
218. Hadi, MNS and Arfiadi, Y (1998). Cost Optimum Design of Reinforced Concrete Structures. Australasian Conference on Structural Optimisation (ACSO’98). Eds. Steven, Querin, Guan and Xie, Published by Oxbridge, Sydney 11-13 February, pp. 343-350.
219.
Hadi, MNS and Malik, AA (1998). Using Flexipave for the Analysis of Road Pavements.
220.
Hadi, MNS (1998). Analysis
of Recycled Road Pavements.
221.
Hadi,
MNS and Malik, AA (1998). Flexipave:
a Finite Element Based Program for the Analysis of Flexible Pavements. Fifth
International Conference on the Bearing Capacity of Roads and Airfields, (BCRA’98).
Eds. Rasmus
222.
Hadi,
MNS and Zarghampour, HR (1998). Non
Linear Finite Element Analysis of Recycled Road Pavements. Fifth
International Conference on the Bearing Capacity of Roads and Airfields,
(BCRA’98). Eds. Rasmus
223.
Hadi,
MNS (1998). Computer Programs in Teaching
Structural Analysis. 4th International Conference on
Computer Aided Learning and Instruction in Science and Engineering (CALISCE’98).
Ed. C.Alvegàrd.
224.
Hadi, MNS and Arfiadi, Y (1998). Genetic Algorithm in Active Control of Civil Engineering Structures. Recent
Advances in Soft Computing’98.
225. Hadi, MNS (1998). Use of Computer Programs in Teaching Structural Analysis. Overview. Vol. 5, No.1, pp. 44-49.
226. Hadi, MNS and Arfiadi, Y (1998), Design of Multi-Tuned-Mass-Damper for Seismically Excited Building Using GA-H2 Control. Australasian Structural Engineering Conference, ASEC, Ed. J.W. Butterworth, The Structural Engineering Society of New Zealand, Auckland, New Zealand, 30 Sept. – 2 Oct. Vol. 1, pp. 25-32.
227. Arfiadi, Y and Hadi, MNS (1998). H2 and H¥ Control of Seismically Excited AMD-Building with General Output Feedback and Regulated Vectors. Australasian Structural Engineering Conference, ASEC, Ed. J.W. Butterworth, The Structural Engineering Society of New Zealand, Auckland, New Zealand, 30 Sept. – 2 Oct. Vol. 1, pp. 17-24.
228.
Hadi,
MNS and Symons, MG (1998). Using
Drucker-Prager Model for the Analysis of Recycled Road Pavements.
Compumod’s Twelfth Australasian Users Conference.
229.
Hadi,
MNS and Malik, AA (1998). Towards
Making Finite Element Programs More Accessible to Pavement Engineers.
Compumod’s Twelfth Australasian Users Conference.
230. Malik, AA. and Hadi, MNS (1997). ROADPRE: A Pre- and Post-Processor for the Analysis of Road Pavements Using STRAND6. The 7th International Conference on Computing in Civil and Building Engineering (ICCCBE-VII). Eds. Choi, Yun and Kwak, Korea Advanced Institute of Science & Technology, KAIST, Seoul, 19-21 August. Vol. 3, pp 1959-1964.
231.
Hadi, MNS, Morris, CE, and Uy, B (1997). Improving the Seminar Presentation System
for Final Year Thesis Students. Overview,
232. Hadi, MNS and Doh, JH (1997). Using Computer Spreadsheets for the Cost Optimum Design of Reinforced Structures. The 7th International Conference on Computing in Civil and Building Engineering (ICCCBE-VII). Eds. Choi, Yun and Kwak, Korea Advanced Institute of Science & Technology, KAIST, Seoul, 19-21 August. Vol.2, pp 939- 944.
233. Hadi, MNS (1997). Computer Aided Design of Cold Formed Steel Structures. The 7th International Conference on Computing in Civil and Building Engineering (ICCCBE-VII). Eds. Choi, Yun and Kwak, Korea Advanced Institute of Science & Technology, KAIST, Seoul, 19-21 August. pp. Vol.1, 721-726.
234. Doh, JH, Hadi, MNS and Kim, JW (1997). Evaluating the Theoretical Approaches for the Analysis of RC Beams. The 7th International Conference on Computing in Civil and Building Engineering (ICCCBE-VII). Eds. Choi, Yun and Kwak, Korea Advanced Institute of Science & Technology, KAIST, Seoul, 19-21 August. Vol.2, pp 861-866.
235.
Das, S. and Hadi, MNS (1997). Post-yielding and Post-cracking Analysis of Reinforced Concrete Beams
by the Finite Element Method. Second
China-Australia Symposium on Computational Mechanics (CASCM’97). Eds.
Valliappan and Khalili, Australian Association for Computational Mechanics and
Chinese Association for Computational Mechanics,
236.
Hadi, MNS, Zarghampour, HR, and Symons, MG. (1996). Nonlinear Analysis of Recycled Road
Pavements. National Symposium on the
Use of Recycled Materials in Engineering Construction.
237.
Das, S. and Hadi, MNS (1996). Use of Spreadsheets in Cost-optimum Design of Structures. Australian Engineering Mathematics
Conference’96 - An International Conference. Eds. Yuen, Broadbridge and
Steiner, IEaust,
238.
Das, S. and Hadi, MNS (1996). Non-linear Finite Element Analyses of Reinforced Concrete Beams. APCOM’96 The Third Asian-Pacific Conference
on Computational Mechanics. Eds. Choi, Yun and Lee,
239.
Das, S and Hadi, MNS (1996). Nonlinear Finite Element Analysis of Reinforced Concrete Members Using
MSC/NASTRAN. 1996 MSC World User’s
Conference.
240.
Abeysinghe, NA, Dharmappa, HB, and Hadi, MNS (1996). Development of a Tool for Cost Estimation
of Water Treatment Plants. Water
Tech.
241.
Doh, H, Khokhar, Z, and Hadi, MNS (1996). Experimental and Numerical Analysis of
Reinforced Concrete Beams. APCOM’96
The Third Asian-Pacific Conference on Computational Mechanics. Eds. Choi,
Yun and Lee,
242.
Hadi, MNS (1996). Utilising
the Capabilities of Spreadsheets in Engineering Design. Australian Engineering Mathematics
Conference’96 - An International Conference. Eds. Yuen, Broadbridge and
Steiner, IEaust,
243.
Hadi, MNS, Morris, CE, and Uy, B (1996). Final Year Engineering Thesis Presentation.
8th AAEE Annual Convention and Conference.
Eds. Morrison and Pudlowski, The
244.
Hadi, MNS (1995). Use
of the World Wide Web in Engineering Education. 1995 International Congress of Engineering Deans & Industry Leaders.
Eds. Pudlowski and Darvall,
245.
Hadi, MNS (1995). Non-linear
Analysis of Reinforced Concrete Beams. Fourteenth
Australasian Conference on the Mechanics of Structures and Materials. Eds
Beasely, Foster and Melerski,
246.
Hadi, MNS (1994). Use
of Computers in Civil Engineering Education. 6th Annual Convention and Conference of the Australian Association for
Engineering Education. Eds. Parr and
247.
Hadi, MNS and Symons, MG (1994). Induced Stresses in Road Pavements Due to Vehicular Loading. Compumod's Eighth Australian Conference,
Design Plus Analysis.
Others
1.
Lei, X,
Pham, TM and Hadi, MNS. (2012). Behaviour
of CFRP Wrapped Square RC Columns under Eccentric Loading. Concrete in
2.
Hadi, MNS (2010). Reinforcing
the Cover of Concrete Columns with Steel Fibres. Concrete in
3.
Hadi, MNS (2006). Behaviour
of FRP Wrapped Concrete Columns under Eccentric Loading. Concrete in
4.
Hadi, MNS (2001). Behaviour of high strength
concrete columns confined with helices. Concrete in
1.
Hadi, MNS (2008). Report
on Testing 3 Plastic Slab Specimens.
2.
Hadi, MNS (2006). Report
on Testing 10 Timber Specimens.
3.
Hadi, MNS (2003). Report on Testing Scaffolds.
4.
Hadi, MNS (2002). Report on Timber Testing.
5.
Hadi, MNS (2002). Report on 39 Timber Specimens
Testing.
6.
Hadi, MNS (2001). Report on Computer Modelling of
Reinforced Road Pavements.
7.
Hadi, MNS (2001). Report on Timber Pallet Testing.
8.
Hadi, MNS (2001). Report on Pavers Testing.
9.
Hadi, MNS (2001). Report on Panel Plate Testing.
10.
Hadi, MNS (2000). Report on Timber Testing.
11.
Hadi, MNS (2000). Report on Site Visit at Kanahooka.
12.
Hadi, MNS (2000). Report on Pallet Testing.
13.
Hadi, MNS (2000). Training Transport to a Chinese Delegate – Life Cycle Cost Analysis.
14.
Hadi, MNS (2000). Training Transport to a Chinese Delegate – Traffic Engineering System.
15.
Hadi, MNS (2000). Training Transport to a Chinese Delegate – Pavement Design System.