Whether you use a Data ONTAP command or an RLM command to manage the RLM depends on the task you want to perform.
| Action | Data ONTAP Command or Procedure | RLM Command |
|---|---|---|
| Set up RLM in a new storage system | Turn on the new storage system. During bootup, press Ctrl-C. From the menu, select 4 or 4a to initialize disks and set up a root volume.
Note: After the Data ONTAP setup script is completed, the RLM rlm setup script is initiated.
|
|
| Reconfigure an RLM in an existing storage system | setup Note:
After the Data ONTAP setup script is completed, the rlm setup script is initiated. |
|
| Initiate the rlm setup script to configure RLM | rlm setup | |
| Test the RLM’s AutoSupport setting | rlm test autosupport | |
| Perform SNMP test on the RLM | rlm test snmp | |
| Display Data ONTAP rlm commands | rlm help | |
| Log in to the RLM | From a UNIX host, enter, ssh user@RLM_IP_addr | |
| Display RLM CLI commands | help or ? | |
| Display the twenty most recent events logged by RLM | events newest 20 | |
| Display a summary of information about the records in the events log | events info | |
| Display the RLM configuration | rlm status or sysconfig
-v
Note: sysconfig
-v
requires advanced mode.
|
rlm status |
| Display statistics gathered by RLM | rlm status -v Note: Requires advanced mode.
|
rlm status -v Note: Requires advanced mode.
|
| Display the system hardware sensor list | system sensors Note: Requires advanced mode.
|
|
| Log in to the system to manage storage system resources | system console Note: Use Ctrl-D to exit to the RLM CLI .
|
|
| Dump the system core and reset the storage system | system core | |
| Reset the RLM | rlm reboot | rlm reboot |
| Update the RLM firmware | software install http://path/RLM_FW.zip -f rlm update |
rlm update http://path/RLM_FW.tar.gz |