You can use SnapMirror S family Edition to replicate data between S family storage systems.
S family
storage systems only support the following versions of
Data ONTAP:
- Data ONTAP 7.2.1 S4
- Data ONTAP 7.2.1 S8
- Data ONTAP 7.2.1 S9
SnapMirror S family Edition
works only for asynchronous replication. When using S family
storage systems as source and destination, you can replicate from:
- One
to another
- One to many
- Many to one
Note: When using SnapMirror S family Edition
for replicating volumes or qtrees, the maximum number of concurrent replication operations is four.
You can use the snapmirror resync command to restore data to an S family storage system.
SnapMirror S family Edition
also supports replication from an S family
storage system to a FAS series
storage system.
Note: In this replication relationship, the FAS series storage system is the destination. Therefore, the FAS series storage system
should be using Data ONTAP 7.2.1
or later.
SnapMirror S family Edition
does not support replication from a FAS series storage system
to an S family storage system.
